ZOLTRIX, INC.
FM-HSP336I
Card Type | Modem (asynchronous) |
Chipset | PCtel HSP/V.34+ |
I/O Options | Voice, speakerphone |
Maximum Data Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Modulation | Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
Fax Class | Class I |
Data Bus | 16-bit ISA |
Card Size | Full height, half length |
CONNECTIONS | |||
Function | Label | Function | Label |
Telephone line out | CN1 | Telephone line in | CN2 |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &P, &S, &T, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \K, \L, \N |
%C, %L, %Q |
Special AT Commands |
#CID |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30, S32, S33, S38, S86, S91 |
Note: See MHI help file for complete information. |
UNIDENTIFIED COMMANDS | |
Command | Default |
S34 | 13 |
Proprietary AT Command Set
AUTO-RETRAIN - AUTO-FALLBACK/FALL-FORWARD | |
Type: | Configuration |
Format: | AT [cmds] %En [cmds] |
Description: | Controls auto-retrain mode and fallback/fall-forward. |
Command | Function |
%E0 | Auto-retrain disabled. |
%E1 | Auto-retrain enabled. |
í %E2 | Auto-retrain and auto-fallback/fall-forward enabled. |
%E3 | Auto-retrain and fast hangup enabled. |
COMMUNICATION PROTOCOLS | |
Type: | Configuration |
Format: | AT [cmds] Bn [cmds] |
Description: | Selects the communication protocol for low-speed data calls. |
Command | Protocol |
B0 | Modem will use ITU-T V.22 at 1200bps. |
í B1 | Modem will use Bell 212A at 1200bps. |
B2 | Modem will use ITU-T V.23 at 1200/75bps. |
COUNTRY CODE | |
Type: | Configuration |
Format: | AT [cmds] %In [cmds] |
Description: | Sets the modem's country code to the country specified. |
Command | Function |
%I1 | Set country code for the United States. |
%I2 | Set country code for France. |
%I3 | Set country code for Germany. |
%I4 | Set country code for Italy. |
%I5 | Set country code for Sweden. |
%I6 | Set country code for the United Kingdom. |
%I7 | Set country code for Japan. |
%I8 | Set country code for Australia. |
%I9 | Set country code for Spain. |
%I10 | Set country code for Taiwan. |
%I11 | Set country code for Singapore. |
%I12 | Set country code for Korea. |
%I13 | Set country code for Switzerland. |
%I14 | Set country code for Norway. |
%I15 | Set country code for the Netherlands. |
%I16 | Set country code for Belgium. |
%I17 | Set country code for Canada. |
%I18 | Set country code for Ireland. |
%I19 | Set country code for Portugal. |
COUNTRY CODE (CON'T) | |
Command | Function |
%I20 | Set country code for Poland. |
%I21 | Set country code for Hungary. |
%I22 | Set country code for Finland. |
%I23 | Set country code for Denmark. |
CPU ALLOCATION | |
Type: | Configuration |
Format: | AT [cmds] %Nn [cmds] |
Default: | 7 |
Range: | 0 - 9 |
Unit: | 10% of total CPU time |
Description: | Selects the maximum amount of CPU processing time the modem will use. Setting %N to 0 disables dynamic CPU allocation. |
DIAL | |
Type: | Immediate |
Format: | AT [cmds] D <#>;[cmds] |
Description: | Dials the telephone number indicated according to any modifiers included in the string. |
Command | Function |
DL | Re-dial last number. |
DS=n | Dial stored telephone number n. |
DW | Dialing resumed following dial tone detection. |
D, | Dialing paused for amount of time specified in S8 register. |
D! | Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook. |
D@ | Wait for Quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string. |
D^ | Calling tone enabled for this call. |
D; | Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command. |
DISPLAY CHIPSET MANUFACTURER | |
Type: | Immediate |
Format: | AT [cmds] #MFR? [cmds] |
Description: | Displays the voice chipset manufacturer’s name. |
DISPLAY CHIPSET MODEL NAME | |
Type: | Immediate |
Format: | AT [cmds] #MDL? [cmds] |
Description: | Displays the model name of the modem's voice chipset. |
DISPLAY CHIPSET REVISION | |
Type: | Immediate |
Format: | AT [cmds] #REV? [cmds] |
Description: | Displays the revision level of the modem's voice chipset. |
DISPLAY INFORMATION | |
Type: | Immediate |
Format: | AT [cmds] In [cmds] |
Description: | Displays information requested about the modem. |
Command | Function |
I0 | Displays product identification code. |
I1 | Displays hardware variation code. |
I2 | Displays internal code. |
I3 | Displays firmware revision. |
I4 | Displays feature bitmap. |
DISPLAY PROFILES | |
Type: | Immediate |
Format: | AT [cmds] &Vn [cmds] |
Description: | Displays the stored profile requested. |
Command | Function |
&V0 | Displays the active profile. |
&V1 | Displays stored profiles. |
&V2 | Displays phone numbers stored with the &Z command. |
ESCAPE SEQUENCE - INVALID SEQUENCE | |
Type: | Configuration |
Format: | AT [cmds] *Qn [cmds] |
Description: | Sets the modem's response when an invalid TIES escape sequence is entered, but the OK response code has already been sent. |
Command | Function |
*Q0 | Modem returns CONNECT response. |
*Q1 | Modem does not return CONNECT response. |
LINE SPEED | |
Type: | Register |
Format | AT [cmds] S37=n [cmds] |
Description: | Sets the maximum allowable data exchange rate attempted during handshake process. |
Command | Function |
í S37=0 | Auto-detect fastest common speed. |
S37=3 | Set speed to 300bps. |
S37=4 | Set speed to 1200bps. |
S37=6 | Set speed to 2400bps. |
S37=7 | Set speed to 4800bps. |
S37=8 | Set speed to 7200bps. |
S37=9 | Set speed to 9600bps. |
S37=10 | Set speed to 12Kbps. |
S37=11 | Set speed to 14.4Kbps. |
S37=12 | Set speed to 28.8Kbps. |
MODE SELECTION | |
Type: | Immediate |
Format: | AT [cmds] #CLS=n [cmds] |
Description: | Selects which mode the modem will operate in. |
Command | Function |
#CLS=0 | Modem will operate in data mode. |
#CLS=1 | Modem will operate in fax class 1 mode. |
#CLS=8 | Modem will operate in voice mode. |
TEST MODE - PTT | |
Type: | Immediate |
Format: | AT [cmds] %Pnn [cmds] |
Description: | Send PTT test signals for line tests. |
Command | Function |
%P00 | Send DTMF digit 0. |
%P01 | Send DTMF digit 1. |
%P02 | Send DTMF digit 2. |
%P03 | Send DTMF digit 3. |
%P04 | Send DTMF digit 4. |
%P05 | Send DTMF digit 5. |
%P06 | Send DTMF digit 6. |
%P07 | Send DTMF digit 7. |
%P08 | Send DTMF digit 8. |
%P09 | Send DTMF digit 9. |
%P10 | Send DTMF digit A. |
%P11 | Send DTMF digit B. |
%P12 | Send DTMF digit C. |
%P13 | Send DTMF digit D. |
%P14 | Send DTMF digit *. |
TEST MODE - PTT (CON'T) | |
Command | Function |
%P15 | Send DTMF digit #. |
%P16 | Send V.21 channel 1 mark symbol. |
%P17 | Send V.21 channel 2 mark symbol. |
%P18 | Send V.23 backward channel mark symbol. |
%P19 | Send V.23 forward channel mark symbol. |
%P20 | Send V.22 originate mark symbol. |
%P21 | Send V.22bis originate mark symbol. |
%P22 | Send V.22 answer signal with guard tone if required. |
%P23 | Send V.22bis answer signal with guard tone if required. |
%P24 | Send V.21 channel 1 space symbol. |
%P25 | Send V.21 channel 2 space symbol. |
%P26 | Send V.23 backward channel space symbol. |
%P27 | Send V.23 forward channel space symbol. |
%P28 | Send V.32 9600bps carrier. |
%P29 | Send V.32bis 14.4Kbps carrier. |
%P30 | Send silence (on-line), i.e., go off-hook. |
%P31 | Send V.25 answer tone. |
%P32 | Send 1800 Hz guard tone. |
%P33 | Send 1300Hz V.25 calling tone. |
%P34 | Send 1100Hz fax calling tone. |
%P35 | Send V.21 channel 2 mark symbol. |
%P36 | Send V.27ter 2400bps carrier. |
%P37 | Send V.27ter 4800bps carrier. |
%P38 | Send V.29 7200bps carrier. |
%P39 | Send V.29 9600bps carrier. |
%P40 | Send V.17 7200bps long train carrier. |
%P41 | Send V.17 7200bps short train carrier. |
%P42 | Send V.17 9600bps long train carrier. |
%P43 | Send V.17 9600bps short train carrier. |
%P44 | Send V.17 12Kbps long train carrier. |
%P45 | Send V.17 12Kbps short train carrier. |
%P46 | Send V.17 14.4Kbps long train carrier. |
%P47 | Send V.17 14.4Kbps short train carrier. |
%P48 | Send V.34 2400bps carrier. |
%P49 | Send V.34 4800bps carrier. |
%P50 | Send V.34 7200bps carrier. |
%P51 | Send V.34 9600bps carrier. |
%P52 | Send V.34 12Kbps carrier. |
%P53 | Send V.34 14.4Kbps carrier. |
%P54 | Send V.34 16.8Kbps carrier. |
%P55 | Send V.34 19.2Kbps carrier. |
%P56 | Send V.34 21.6Kbps carrier. |
%P57 | Send V.34 24Kbps carrier. |
%P58 | Send V.34 26.4Kbps carrier. |
TEST MODE - PTT (CON'T) | ||
Command | Function | |
%P59 | Send V.34 28.8Kbps carrier. | |
%P60 | Send V.32bis 9600bps carrier. | |
%P61 | Send V.32bis 12Kbps carrier. | |
%P62 | Send Bell 212A originate carrier. | |
%P63 | Send Bell 212A answer carrier. | |
%P64 | Send Bell 103 originate mark signal. | |
%P65 | Send Bell 103 originate space signal. | |
%P66 | Send Bell 103 answer mark symbol. | |
%P67 | Send Bell 103 answer space symbol. | |
%P99,n | Range: | 0 - 23 |
Unit: | 150 Hz | |
Description: | The modem will return the strength of the signal at the specified frequency. |
SPEAKERPHONE OPTIONS | |||
Type: | Configuration | ||
Format: | AT [cmds] #SPK=x,y,z [cmds] | ||
Description: | Sets various options for speakerphone functions. | ||
Command | Function | ||
x =0 | Microphone enabled. | ||
x =1 | Microphone disabled. | ||
x =2 | Microphone enabled with maximum gain, speaker disabled. | ||
y | Default: | 5 | |
Range: | 0 - 16 | ||
Unit: | -2 dBm | ||
Description: | Sets the attenuation level for speaker output in voice mode. A value of 16 will mute the speaker. | ||
z =0 | Microphone gain set to 0 dBm. | ||
z =1 | Microphone gain set to 6 dBm. | ||
z =2 | Microphone gain set to 9.5 dBm. | ||
z =3 | Microphone gain set to 12 dBm. |
TONE DETECTION | |||||
Format: | AT [cmds] #VTD=x,y,z [cmds] | ||||
Default: | x ,y,z 63 | ||||
Range: | 0 - 63 | ||||
Description: | Sets which tones the tone detection will report. | ||||
Note: | The value of x sets the tone detection modes in voice transmit mode, y sets them in voice receive mode, and z sets them in voice command mode. | ||||
Bit | Value | Function | |||
0 | 0 í 1 | DTMF tones are not detected. DTMF tones are detected. | |||
1 | 0 í 1 | V.25 1300Hz calling tone is not detected. V.25 1300Hz calling tone is detected. | |||
2 | 0 í 1 | T.30 1100Hz fax tone is not detected. T.30 1100Hz fax tone is detected. | |||
3 | 0 í 1 | V.25/T.30 2100Hz answer tone is not detected. V.25/T.30 2100Hz answer tone is detected. | |||
4 | 0 í 1 | Bell 2225Hz answer tone is not detected. Bell 2225Hz answer tone is detected. | |||
5 | 0 í 1 | Call progress tones are not detected. Call progress tones are detected. |
TONE GENERATOR - DIRECT ENTRY | |
Type: | Immediate |
Format: | AT [cmds] #VTS=[m, n, x] |
Range: | m 200-3000, n 200-3000, x 0-255 |
Unit: | m 1 Hz, n 1 Hz, x .1 second |
Description: | Generates a dual-frequency tone for duration x at frequencies m and n. |
TONE GENERATOR - TIMED PHONE KEYS | |
Type: | Immediate |
Format: | AT [cmds] #VTS={a, n} |
Range: | a 0-9, A-D, #, *; x 0-255 |
Unit: | x .1 second |
Description: | Generates the DTMF tone for duration x for the character a. |
TONE GENERATOR LENGTH | |
Format | AT [cmds] #VBT=n [cmds] |
Default: | 10 |
Range: | 0 - 40 |
Unit: | 0.1 second |
Description: | Sets the length of DTMF tones that are generated. |
TRELLIS CODING | ||
Type: | Configuration | |
Format: | AT [cmds] &Un [cmds] | |
Description: | Selects whether the modem will use trellis coding. | |
Command | Function | |
í &U0 | Trellis coding enabled. | |
&U1 | Trellis coding disabled. |
V.34 BAUD RATE | |
Type: | Configuration |
Format: | AT [cmds] S35=n [cmds] |
Description: | Sets the maximum baud rate for V.34. |
Command | Function |
í S35=0 | Maximum baud rate set to 2400 baud. |
S35=1 | Maximum baud rate set to 2743 baud. |
S35=2 | Maximum baud rate set to 2800 baud. |
S35=3 | Maximum baud rate set to 3000 baud. |
S35=4 | Maximum baud rate set to 3200 baud. |
S35=5 | Maximum baud rate set to 3429 baud. |
VOICE BUFFER SPACE | |
Type: | Configuration |
Format: | AT [cmds] #VSK=n [cmds] |
Default: | 255 |
Range: | 0 - 255 |
Unit: | 1 byte |
Description: | Sets the amount of data the modem can send into the buffer after the XOFF signal is sent. |
VOICE DEVICE | |
Type: | Configuration |
Format: | AT [cmds] #VLS=n [cmds] |
Description: | Selects the I/O device for the DSP chip. |
Note: | This modem may not support all options listed below. The #VLS? command will display the available options. |
Command | Function |
í #VLS=0 | Telephone line and handset used for voice I/O. |
#VLS=1 | Telephone handset used for voice I/O. |
#VLS=2 | Internal speaker only used for voice I/O. |
#VLS=3 | External microphone only used for voice I/O. |
#VLS=4 | Telephone line and handset used for voice I/O; internal speaker enabled. |
#VLS=6 | Speakerphone used for voice I/O. |
VOICE - DISPLAY BUFFER SIZE | |
Type: | Immediate |
Format: | AT [cmds] #VBQ? [cmds] |
Description: | Displays the size of the voice buffer. |
VOICE - DISPLAY COMPRESSION TYPE | |
Type: | Immediate |
Format: | AT [cmds] #VCI? [cmds] |
Description: | Displays the type of compression currently in use. |
VOICE GAIN LEVEL | |
Type: | Configuration |
Format: | AT [cmds] #RG=hhhh [cmds] |
Default: | 7FFF |
Range: | 0000 - 7FFF |
Unit: | Unidentified (hexadecimal) |
Description: | Sets the gain level for recording audio in voice mode. |
VOICE - LOCAL SERIAL PORT SPEED | |
Type: | Configuration |
Format: | AT [cmds] #BDR=n [cmds] |
Default: | 0 |
Range: | 0 - 48 |
Unit: | 2400bps |
Description: | Sets the speed of the local serial port when in voice mode. A value of 0 indicates that the modem should auto-detect the correct serial port speed. |
VOICE RE-RING DETECT TIME | |
Type: | Configuration |
Format: | AT [cmds] #VRA=n [cmds] |
Default: | 70 |
Range: | 0-255 |
Unit: | 10 mS |
Description: | Sets the maximum time the modem will wait for the remote station to ring again before it assumes that it has gone off-hook. |
VOICE RECEIVE | |
Type: | Immediate |
Format: | AT [cmds] #VRX |
Description: | Commands the modem to begin receiving voice data. |
VOICE RING DETECT TIME | |
Type: | Configuration |
Format: | AT [cmds] #VRN=n [cmds] |
Default: | Unidentified |
Range: | Unidentified |
Unit: | Unidentified |
Description: | Sets the maximum time the modem will wait for the remote station to ring before it assumes that it went off-hook before it rang. |
VOICE SILENCE DETECTION TIME | |
Type: | Configuration |
Format: | AT [cmds] #VSP=n [cmds] |
Default: | Unidentified |
Range: | 0 - 255 |
Unit: | .1 second |
Description: | Sets the minimum amount of silence that the modem will detect. |
VOICE SILENCE DETECTION THRESHOLD | |
Type: | Configuration |
Format: | AT [cmds] #VSS=n [cmds] |
Description: | Sets the threshold of sensitivity that the modem uses to determine silence detection. |
Command | Function |
#VSS=0 | Silence detection disabled. |
#VSS=1 | Minimum silence detection sensitivity. |
#VSS=2 | Standard silence detection sensitivity. |
#VSS=3 | Maximum silence detection sensitivity. |
VOICE TRANSMISSION LEVEL | |
Type: | Configuration |
Format: | AT [cmds] #TL=hhhh [cmds] |
Default: | 3FFF |
Range: | 0000 - 7FFF |
Unit: | Unidentified (hexadecimal) |
Description: | Sets the transmission level for sending audio in voice mode. |
VOICE TRANSMIT | |
Type: | Immediate |
Format: | AT [cmds] #VTX |
Description: | Commands the modem to begin transmitting voice data. |