ZOLTRIX, INC.
FM-HSP336P
Card Type | Modem, Fax |
Chip Set | PCtel |
I/O Options | Line in (RJ-11), line out (RJ-11) |
Maximum Modem Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Modulation Protocol | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34, V.34bis |
Fax Modulation Protocol | ITU-T V.17, V.21CHANNEL2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
Fax Class | Class I |
Data Bus | 16-bit ISA |
Card Size | Half-length, half-height card |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
Line out | CN1 | Line in | CN2 |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, A/ |
A, B, D, E, H, I, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &P, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \G, \K, \L, \N |
%C, %E, %L |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S30, S32, S33, S37, S38, S86, |
S91 |
Note: See MHI Help File for full command documentation. |
Proprietary AT Command Set
TRELLIS CODING CONFIGURATION | |
Type: | Configuration |
Format: | AT [cmds] &Un [cmds] |
Description: | Controls the Trellis coding settings |
Command | Function |
í &U1 | Trellis coding disabled |
&U1 | Trellis coding enabled |
Extended AT Commands
CPU USAGE SETTINGS | |
Type: | Configuration |
Format: | AT [cmds] %Nn [cmds] |
Description: | Selects the total usage of the CPU while operating the modem. Default=%N7 |
S(Status)-Register
V.34 DATA RATE | |
Type: | Register |
Format | AT [cmds] S34=n [cmds] |
Default: | 11 |
Range: | Unidentified |
Unit: | bits |
Description: | Determines the data rate while using V.34 compression |
V.34 SYMBOL RATE | |
Type: | Register |
Format | AT [cmds] S34=n [cmds] |
Default: | 0 |
Description: | Determines the baud rate while using V.34 compression |