WISECOM, INC.
WS-2814IS6
Card Type | Modem (asynchronous) |
Chipset | Rockwell |
I/O Options | Voice, microphone in, speaker out |
Maximum Data Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | 8-bit ISA |
Fax Class | Class I & II |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Function | Label | Function | Label |
Telephone line in | CN1 | Speaker out | CN3 |
Telephone line in | CN2 | Microphone in | CN4 |
SERIAL PORT ADDRESS SELECTION | ||
Setting | JP8-1 | JP8-2 |
3F8h (COM1:) | Pins 1 & 2 closed | Pins 1 & 2 closed |
2F8h (COM2:) | Pins 2 & 3 closed | Pins 1 & 2 closed |
3E8h (COM3:) | Pins 1 & 2 closed | Pins 2 & 3 closed |
2E8h (COM4:) | Pins 2 & 3 closed | Pins 2 & 3 closed |
INTERRUPT SELECTION | ||||
Setting | JP8-3 | JP8-4 | JP8-5 | JP8-6 |
IRQ2 | Closed | Open | Open | Open |
IRQ3 | Open | Closed | Open | Open |
IRQ4 | Open | Open | Closed | Open |
IRQ5 | Open | Open | Open | Closed |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &P, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \K, \N |
%C, %E, %L, %Q |
Special AT Commands |
+MS |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25 |
S26, S27, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95 |
Note: See MHI documentation for complete information. |
UNIDENTIFIED COMMANDS | |
Command | Default |
S37 | 0 |
Proprietary AT Command Set
See WISECOM, INC. WS-2814IM6 for a full command summary.