DATA/FAX MODEM 14.4 V.32BIS modem/telephone/ISDN Settings and Configuration

Card Type	Fax, Modem (asynchronous)
Chip Set	Unidentified
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	8-bit ISA
Fax Class	Class I
Data Modulation Protocol	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

CONNECTIONS
Function	Label		Function		Label
Line in		CN1		Line out		CN2

SERIAL PORT ADDRESS
Setting	JP8/1	JP8/2
COM1 (3F8h)	Pins 1 & 2 closed	Pins 1 & 2 closed
COM2 (2F8h)	Pins 2 & 3 closed	Pins 1 & 2 closed
COM3 (3E8h)	Pins 1 & 2 closed	Pins 2 & 3 closed
í COM4 (2E8h)	Pins 2 & 3 closed	Pins 2 & 3 closed

INTERRUPT
Setting	JP8/3	JP8/4	JP8/5	JP8/6
2	Closed	Open	Open	Open
í 3	Open	Closed	Open	Open
4	Open	Open	Closed	Open
5	Open	Open	Open	Closed

AUTO-RETRAIN - FALLBACK/FALLFORWARD
Type:	Configuration
Format:	AT [cmds] %En [cmds]
Description:	Controls auto-retrain mode and fallback/fall forward
Command	Function
%E0	Auto-retrain disabled
%E1	Auto-retrain enabled
í %E2	Fallback/fall forward enabled

BIT MAPPED REGISTERS
Register	Default
S14	Unidentified
S16	0
S21	Unidentified
S22	Unidentified
S23	Unidentified
S27	Unidentified
S31	Unidentified
S41	131

BREAK TYPE
Type	Configuration
Format	AT [cmds] \Kn [cmds]
Default	5
Range	0-5
Description	Configures action of break signal

CONNECT MODE
Type:	Configuration
Format:	AT [cmds] \Nn [cmds]
Description:	Sets connect mode
Command	Function
\N0	Normal mode enabled

FAX TRANSMIT LEVEL
Type:	Register
Format:	AT [cmds] S92=n [cmds]
Default:	10
Range:	0-15
Unit:	-1dBm
Description:	Controls fax transmission level

FLASH DIAL MODIFIER TIME
Format	AT [cmds] S29=n [cmds]
Default:	0
Range:	0-255
Unit:	.01 second
Description:	Time the modem will go on-hook upon receiving the ! dial modifier in dial string.

FLOW CONTROL CHARACTER - XOFF
Type:	Register
Format:	AT [cmds] S33=n [cmds]
Default:	19
Range:	0-255
Unit:	ASCII
Description:	Sets the character used to represent XOFF

FLOW CONTROL CHARACTER - XON
Type:	Register
Format:	AT [cmds] S32=n [cmds]
Default:	17
Range:	0-255
Unit:	ASCII
Description:	Sets the character used to represent XON

LINE SIGNAL LEVEL
Type:	Immediate
Format:	AT [cmds] %L [cmds]
Description:	Returns a value which indicates the received line signal level

LINE SIGNAL QUALITY
Type:	Immediate
Format:	AT [cmds] %Q [cmds]
Description:	Returns a value which indicates line signal quality

RPI
Type:	Configuration
Format:	AT [cmds] +Hn [cmds]
Description:	Controls RPI and sets DTE speed
Command		Function
+H0		RPI disabled
+H1		RPI enabled, DTE speed 19200bps
+H2		RPI enabled, DTE speed 38400bps
+H3		RPI enabled, DTE speed 57600bps

SLEEP TIMER
Format	AT [cmds] S24=n [cmds]
Default:	0
Range:	0-255
Unit:	1 second
Description:	Maximum duration of DTE and DCE inactivity allowed prior to initiating low-power sleep mode.

TRANSMIT ATTENUATION LEVEL
Type:	Register
Format:	AT [cmds] S91=n [cmds]
Default:	10
Range:	0-15
Unit:	-1dBm
Description:	Controls transmission attenuation level