MODEM ANCHOR 2400E (REV.3) modem/telephone/ISDN Settings and Configuration

Card Type	Modem (asynchronous)
Chip Set	Unidentified
Maximum Data Rate	2400bps
Maximum Fax Rate	9600bps
Data Bus	External
Fax Class	Unidentified
Data Modulation Protocol	Bell 103J/212A ITU-T V.21, V.22, V.22bis
Fax Modulation Protocol	ITU-T V.27ter, V.29

CONNECTIONS
Function	Label		Function		Label
Line out		CN1		RS-232/422		CN3
Line in		CN2		DC power		CN4

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í DTR normal	SW1/1	On
DTR forced high	SW1/1	Off
í CD normal	SW1/2	On
CD forced high	SW1/2	Off
í AT command set enabled	SW1/3	Off
AT command set disabled	SW1/3	On
í Factory configured - do not alter	SW1/4	N/A

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
MR	Red	On	Power is on
MR	Red	Off	Power is off
RD	Red	On	Modem is receiving data
RD	Red	Off	Modem is not receiving data
SD	Red	On	Modem is transmitting data
SD	Red	Off	Modem is not transmitting data
AA	Red	On	Auto-answer enabled
AA	Red	Off	Auto-answer disabled
CD	Red	On	Carrier signal detected
CD	Red	Off	Carrier signal not detected
OH	Red	On	Modem is off-hook
OH	Red	Off	Modem is on-hook
HS	Red	On	Modem is operating at 2400bps
HS	Red	Off	Modem is operating at slower than 2400bps
TR	Red	On	DTR signal is high
TR	Red	Off	DTR signal is low