U.S. ROBOTICS, INC.
COURIER 2400PC
Card Type | Modem (Asynchronous) |
Chip Set | U.S. Robotics |
Maximum Data Rate | 2400bps |
Data Bus | Unidentified |
Data Modulation Protocol | Unidentified |
V1984
USER CONFIGURABLE SETTINGS | ||
Setting | Label | Position |
í DTR normal | SW1/1 | Off |
DTR forced high | SW1/1 | On |
í Verbal result codes | SW1/2 | Off |
Numeric result codes | SW1/2 | On |
í Enable result codes displayed | SW1/3 | On |
Disable result codes displayed | SW1/3 | Off |
í Local echo enabled | SW1/4 | Off |
Local echo disabled | SW1/4 | On |
í Auto answer disabled | SW1/5 | On |
Auto answer enabled | SW1/5 | Off |
í CD signal normal | SW1/6 | Off |
CD signal forced high | SW1/6 | On |
í RJ-11 | SW1/7 | Off |
RJ-12, RJ-13 | SW1/7 | On |
í Smart mode enabled | SW1/8 | On |
Dumb mode enabled | SW1/8 | Off |
í Normal operation enabled | SW1/9 | On |
Escape sequence enabled | SW1/9 | Off |
í Restore NVRAM defaults | SW1/10 | Off |
Restore factory defaults | SW1/10 | On |
Proprietary AT Command Set
BIT-MAPPED REGISTER S15 | ||
Format | AT [cmds] S15=n [cmds] | |
Default: | 0 | |
Range: | 0-81 | |
Unit: | Bit-mapped | |
Description: | Controls HST high frequency equalization, non-error-correcting mode buffer, MNP4, BS/DEL switch, MNP compliance and InterBridge compatibility. | |
Bit | Value | Function |
0 | í 01 | HST high frequency equalization enabled HST high frequency equalization disabled |
1 - 2 | í 00 | Not used |
3 | í 01 | Non-error-correcting mode transmit buffer set to 1.5KB Non-error-correcting mode transmit buffer set to 128 bytes |
4 | í 01 | MNP 4 enabled MNP 4 disabled |
5 | í 01 | Disable Specialized application Enable Specialized application only |
6 | í 01 | MNP normal MNP adjusted for non compliant modems |
7 | í 01 | InterBridge compatibility disabled InterBridge compatibility enabled |
See document V1983 for a full command summary.