COMMUNICATOR 14.4, STI-FAX/14.4V modem/telephone/ISDN Settings and Configuration

Card Type	Modem (asynchronous)
Chipset	Unidentified
I/O Options	Voice
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation	Bell 103A, 212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis
Fax Modulation	ITU-T V.17, V.27ter, V.29
Error Correction/Compression	MNP5, MNP10EC, V.42, V.42bis
Fax Class	Class I & II
Data Bus	PCMCIA Type II

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \G, \K, \N

%C, %E, %L, %Q

Special AT Commands

:E, *H, -K, )M, @M, +MS, -Q

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25

S26, S27, S29, S30, S31, S32, S33, S36, S38, S46, S48, S82, S86, S95, S201

Note: See MHI help file for complete information.

DISTINCTIVE RING
Format:		AT [cmds] -SDRn [cmds]
Default:		Unidentified
Range:		0 - 7
Description:		Selects which distinctive ring signals the modem will respond to.
Bit	Value		Function
0	0 1		Do not respond to distinctive ring type 1. Respond to distinctive ring type 1.
1	0 1		Do not respond to distinctive ring type 2. Respond to distinctive ring type 2.
2	0 1		Do not respond to distinctive ring type 3. Respond to distinctive ring type 3.

FIRMWARE DOWNLOAD
Type:	Configuration
Format:	AT [cmds] **
Description:	Downloads new code to the firmware flash memory in ASCII format.

MNP10EC MODE
Type:	Configuration
Format:	AT [cmds] -SEC=m,n [cmds]
Description:	Selects whether the modem will attempt to use MNP10EC mode during the handshaking sequence.
Command		Function
m=0		MNP10EC handshaking disabled unless a V.34 connection is attempted via a cellular line.
í m=1		MNP10EC handshaking enabled.
n		Default:	Unidentified
		Range:	-10 to -30
		Unit:	-1 dBm
		Description:	Sets the initial transmission level.