V.34P modem/telephone/ISDN Settings and Configuration

Card Type	Modem (synchronous/asynchronous)
Chip Set	Unidentified
I/O Options	None
Maximum Data Rate	33.6Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	16-bit ISA
Fax Class	Class I & II
Data Modulation Protocol	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

CONNECTIONS
Function	Label		Function		Label
Line out		CN1		Line in		CN2

PLUG-N-PLAY SELECTION
Setting	JP18	JP20
Enabled	Closed	Pins 2 & 3 closed
í Disabled	Open	Pins 1 & 2 closed

SERIAL PORT ADDRESS SELECTION
Setting	JP18	JP19
3F8h (COM1:)	Closed	Closed
2F8h (COM2:)	Closed	Open
3E8h (COM3:)	Open	Closed
2E8h (COM4:)	Open	Open

INTERRUPT SELECTION
Setting	JP8	JP9	JP10	JP11	JP12	JP13	JP14	JP15	JP16
í IRQ3	Open	Open	Open	Open	Open	Open	Open	Open	Closed
IRQ4	Open	Open	Open	Open	Open	Open	Open	Closed	Open
IRQ5	Open	Open	Open	Open	Open	Open	Closed	Open	Open
IRQ7	Open	Open	Open	Open	Open	Closed	Open	Open	Open
IRQ9	Open	Open	Open	Open	Closed	Open	Open	Open	Open
IRQ10	Open	Open	Open	Closed	Open	Open	Open	Open	Open
IRQ11	Open	Open	Closed	Open	Open	Open	Open	Open	Open
IRQ12	Open	Closed	Open	Open	Open	Open	Open	Open	Open
IRQ15	Closed	Open	Open	Open	Open	Open	Open	Open	Open

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z

Extended AT Commands

\A, \B, \G, \K, \L, \N, \W

%C, %F, %L, %Q, %T

Special AT Commands

#CID, :E, *H, -K, )M, @M, +MS, -Q

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S24, S25, S27

S29, S30, S31, S32, S33, S36, S38, S39, S40, S46, S48, S86, S91, S92, S95, S201

Note: See MHI documentation for complete information.