PM33V14I (TI) modem/telephone/ISDN Settings and Configuration

Card Type	Modem (asynchronous)
Chipset	Texas Instruments
I/O Options	Voice
Maximum Data Rate	33.6Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation	Unidentified
Fax Modulation	Unidentified
Error Correction/Compression	MNP5, MNP10, V.42, V.42bis
Fax Class	Unidentified
Data Bus	8-bit ISA
Card Size	Full height, one-third length

CONNECTIONS
Function	Label	Function	Label
Telephone line	CN1	Telephone line	CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
Plug-N-Play enabled	J3/C	Open
Plug-N-Play disabled	J3/C	Closed
Note: When Plug-N-Play is enabled, all other jumpers should be set to Open.

SERIAL PORT ADDRESS SELECTION
Setting	J3/A	J3/B
3F8h (COM1:)	Closed	Closed
2F8h (COM2:)	Open	Closed
3E8h (COM3:)	Closed	Open
2E8h (COM4:)	Open	Open

INTERRUPT SELECTION
Setting	J2/A	J2/B	J2/C	J2/D	J2/E
2	Closed	Open	Open	Open	Open
3	Open	Closed	Open	Open	Open
4	Open	Open	Closed	Open	Open
5	Open	Open	Open	Closed	Open
7	Open	Open	Open	Open	Closed

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \K, \N, \V

%C, %E, %L, %Q, %TT

Special AT Commands

-K

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S22, S24, S25, S26, S29

S30, S32, S33, S39, S41, S46, S48, S82, S91, S92

Note: See MHI help file for complete information.

UNIDENTIFIED COMMANDS
Command	Default
S21	4
S23	55
S27	74
S28	0
S31	194
S37	0
S41	13

DISPLAY INFORMATION
Type:	Immediate
Format:	AT [cmds] In [cmds]
Description:	Displays information requested about the modem.
Command	Function
I0	Displays product identification code.
I1	Displays ROM checksum.
I2	Tests and displays ROM checksum result.
I3	Displays firmware model, revision and interface type.
I4	Displays OEM string.
I5	Displays country code.
I6	Displays data pump model and revision.