POWERCOM AMERICA, INC.
9624 EXTERNAL
Card Type | Fax, Modem (synchronous/asynchronous) |
Chip Set | Unidentified |
Maximum Data Rate | 2400bps |
Maximum Fax Rate | 9600bps |
Data Bus | External |
Fax Class | Class I |
Data Modulation Protocol | Bell 103/212A ITU-T V.21, V.22, V.22bis, V.23 |
Fax Modulation Protocol | ITU-T V.21CH2, V.27ter, V.29 |

CONNECTIONS | ||||||
Function | Label | Function | Label | |||
Line in | CN1 | DC power | CN4 | |||
Line out | CN2 | Power switch | SW1 | |||
RS-232/422 | CN3 | |||||
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
í SMART mode | JP1 | Open |
DUMB mode | JP1 | Closed |
MISCELLANEOUS TECHNICAL NOTES |
Note: On U.S. models; V.23, MNP5, V.42, V.42bis is not applicable. |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
HS | Red | On | Modem is operating at 2400bps |
HS | Red | Off | Modem is not operating at 2400bps |
AA | Red | On | Auto-answer enabled |
AA | Red | Off | Auto-answer disabled |
AA | Red | Blinking | Phone is ringing |
CD | Red | On | Carrier signal detected |
CD | Red | Off | Carrier signal not detected |
CD | Red | Blinking | Modem is retraining |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
RD | Red | On | Modem is receiving data |
RD | Red | Off | Modem is not receiving data |
SD | Red | On | Modem is transmitting data |
SD | Red | Off | Modem is not transmitting data |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
MR | Red | On | Power is on |
MR | Red | Off | Power is off |
MR | Red | Blinking | Modem in self-test mode |
Proprietary AT Command Set
See document V1833 for a full command summary.