ALLIANCE V.32/19.2, ALLIANCE V.32/19.2M modem/telephone/ISDN Settings and Configuration
PENRIL DATABILITY NETWORKS
ALLIANCE V.32/19.2, ALLIANCE V.32/19.2M
Modem Type | Data (synchronous/asynchronous)/Fax |
Maximum Data Rate | 19.2Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | External |
Fax Class | Class I & II |
Data Modulation Protocol | Bell 103A/212A, 208A/B ITU-T V.21, V.22, V.22bis, V.26, V.26bis V.27bis, V.27ter V.29,V.32, V.32bis, V.33 AT&T V.32terbo |
Fax Modulation Protocol | ITU-T V.17, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
LCD display | LCD | Line in | CN1 |
Left arrow button | BT1 | Leased line out | CN2 |
1 button | BT2 | Leased line out | CN3 |
2 button | BT3 | Switched line out | CN4 |
3 button | BT4 | DC power | CN5 |
Right arrow button | BT5 | Diagnostic connector | CN6 |
ENTER button | BT6 | RS-232/422 | CN7 |
A/A1 - MI/MIC CONTROL | ||
Control Type | JP5 | JP6 |
| » A/A1 control. | Pin 1 & 2 closed. | Pin 1 & 2 closed. |
MI/MIC control. | Pin 2 & 3 closed. | Pin 2 & 3 closed. |
DTE CONNECTOR - PIN 25 | |
Function | JP7 |
Analog loopback (Input). | Pin 1 & 2 closed. |
| » Test Mode Indicator (Output). | Pin 2 & 3 closed. |
FRAME/SIGNAL GROUND | |
Ground Type | JP1 |
Frame and signal ground connected. | Pin 1 & 2 closed. |
| » Frame and signal ground not connected. | Pin 2 & 3 closed. |
FACTORY CONFIGURED SETTINGS - DO NOT ALTER | |
Jumper | Setting |
JP8 | Pin 2 & 3 closed. |
JP9 | Pin 2 & 3 closed. |
JP10 | Pin 2 & 3 closed. |
JP11 | Pin 2 & 3 closed. |
POWER | |||
Power Source | JP2 | JP3 | JP4 |
| » AC power. | Pin 1 & 2 closed. | Pin 1 & 2 closed. | Pin 1 & 2 closed. |
DC power. | Pin 2 & 3 closed. | Pin 2 & 3 closed. | Pin 2 & 3 closed. |
Proprietary AT Command Set
See document V1409 for a full command summary.
My Books
