2026P modem/telephone/ISDN Settings and Configuration

Card Type	Interface Converter
Chip Set	Patton
I/O Options	25-pin serial port, 36-pin parallel port, power
Maximum Data Rate	38.4Kbps
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
36-pin parallel port	CN1	Power	CN3
25-pin DTE/DCE serial port	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Hardware flow control enabled	SW1/1	Off
	Software flow control enabled	SW1/1	On
	Parallel BERT output message	SW1/1	Off
	Serial BERT output message	SW1/1	On
»	Bit error rate test (BERT) disabled	SW1/2	Off
	Bit error rate test (BERT) enabled	SW1/2	On
Note: Setting SW1/2 to the on position, activates the BERT error test and enables the secondary usage of switch SW1/1

DATA FORMAT
Data		Parity	Stop Bits	SW1/3	SW1/4	SW1/5
»	8bits	No parity	1 stop bit	Off	Off	Off
	8bits	Odd parity	1 stop bit	On	Off	Off
	8bits	Even parity	1 stop bit	Off	On	Off
	7bits	Odd parity	2 stop bits	On	On	Off
	7bits	Even parity	2 stop bits	Off	Off	On
	7bits	No parity	2 stop bits	On	Off	On
	7bits	Odd parity	1 stop bit	Off	On	On
	7bits	Even parity	1 stop bit	On	On	On

DATA RATE
Setting		SW1/6	SW1/7	SW1/8
	300bps	Off	Off	On
	600bps	On	Off	On
	1200bps	On	On	Off
	2400bps	Off	On	On
	4800bps	On	On	On
»	9600bps	Off	Off	Off
	19.2Kbps	On	Off	Off
	38.4Kbps	Off	On	Off