1030/1030S modem/telephone/ISDN Settings and Configuration

Card Type	Short Range Modem
Chip Set	Unidentified
I/O Options	25-pin serial port (RS-232), network interface via RJ-45 (RJ-11 optional) terminal block
Wiring Type	Unshielded twisted pair
Maximum Data Rate	19.2Kbps
Data Bus	External

CONNECTIONS
Function		Label		Function		Label
DTE/DCE serial port (25-pin connector)	CN1		Twisted pair connection terminal blocks		CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Factory configured - do not alter	SW1/1	Off
í Carrier forced high	SW1/2	On
Carrier controlled by RTS	SW1/2	Off
í 7ms delay between RTS and CTS signals	SW1/5	On
53ms delay between RTS and CTS signals	SW1/5	Off

TRANSMIT CLOCK SOURCE
Source	SW1/3	SW1/4
Transmit clock derived from terminal interface	On	On
Transmit clock derived from terminal interface	On	Off
í Transmit clock generated internally	Off	On
Transmit clock derived from receive line signal	Off	Off

DATA RATE
Setting		SW1/6		SW1/7			SW1/8
1200bps			On			On			On
2400bps			On			On			Off
4800bps	On				Off			On
7200bps	Off				On			Off
í 9600bps	On				Off			On
14.4Kbps	Off				On			Off
19.2Kbps	Off				Off			On
19.2Kbps	Off				Off			Off

MISCELLANEOUS TECHNICAL NOTES

Patton Electronics model 1030S is the surge protected version of model 1030