PATTON ELECTRONICS COMPANY
1012A (DUAL PORT)
Card Type | Short Range Modem |
Chip Set | Unidentified |
I/O Options | 25-pin serial port (RS-232), network interface via RJ-45, or RJ-11 connectors (2) |
Wiring Type | Unshielded twisted pair |
Maximum Data Rate | 38.4Kbps |
Data Bus | External |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
DTE/DCE serial port (25-pin connector) | CN1 | UTP interface - secondary (RJ-45 or RJ-11) | CN3 | |||
UTP interface - primary (RJ-45 or RJ-11) | CN2 | |||||
Note: Secondary twisted pair connector used to facilitate daisy chaining |
USER CONFIGURABLE SETTINGS | ||
Setting | Label | Position |
DTE mode | SW1 | On |
DCE mode | SW1 | Off |
RTS/DCD CONTROL | ||
DCE | DTE | JP1 |
Carrier forced high | Carrier forced high | Open |
Carrier activated by RTS - pin 4 | Carrier activated by DCD - pin 8 | Closed |