1184 modem/telephone/ISDN Settings and Configuration

PATTON ELECTRONICS COMPANY

1184

Card Type
Modem
Chip Set
Unidentified
I/O Options
AC power connector, DTE/DCE serial port,
network interface via ST or SMA connector
Wiring Type
Fiber optic cable
Topology
Daisy chain, star
Maximum Data Rate
128Kbps (synchronous), 19.2Kbps (asynchronous)
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
Power connector
CN1
Network interface via ST connector
CN3
DTE/DCE port (quick connect module)
CN2
Power switch
SW3
Note:
Quick connect serial interface module can be configured as a V.24/RS-232, V.35, RS422/530, or X.21 port. Device is available with either a fiber ST or SMA connector (CN3)

USER CONFIGURABLE SETTINGS
Setting
Label
Position
í Modem ignores requests from DTE
S1/7
Off
Modem responds to digital loopback requests from DTE
S1/7
On
í Modem ignores requests from DTE
S1/8
Off
Modem responds to local analog loopback requests from DTE
S1/8
On

TRANSMIT CLOCK SOURCE
Source
S1/5
S1/6
í Transmit clock generated internally
On
On
Transmit clock generated internally
On
Off
Transmit clock derived from terminal interface
Off
On
Transmit clock derived from receive line signal
Off
Off

DATA RATE (ASYNCHRONOUS)
Setting
S1/1
S1/2
S1/3
S1/4
0-19.2Kbps
On
Off
Off
On

DATA RATE (SYNCHRONOUS)
Setting
S1/1
S1/2
S1/3
S1/4
4800bps
Off
On
On
Off
9600bps
Off
On
On
On
14.4Kbps
On
Off
On
Off
19.2Kbps
On
Off
On
On
28.8Kbps
Off
Off
On
Off
32Kbps
Off
Off
Off
Off
56Kpbs
Off
On
Off
Off
64Kbps
Off
Off
Off
On
128Kbps
On
On
On
On

TEST SELECTOR
Function
Label
Position
Remote digital loopback initiated
SW2
1
Normal operation. Loopback not activated
SW2
2
Activates local analog loopback
SW2
3

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
TD
Red
On
Data is being transmitted (low logic level, device idle)
TD
Green
On
Data is being transmitted (high logic level)
TD
None
Off
Data is not being transmitted
RD
Red
On
Data is being received (low logic level, device idle)
RD
Green
On
Data is being received (high logic level)
RD
None
Off
Data is not being received
RTS
Green
On
RTS signal is high
RTS
Green
Off
RTS signal is low
CD
Green
On
Carrier signal detected
CD
Red
On
Carrier signal not detected
DTR
Green
On
DTR signal is high
DTR
Green
Off
DTR signal is low
NS
Red
On
Local modem not connected to remote modem
NS
Red
Off
Local modem connected to remote modem
ER
Red
On
Bit error likely in received signal or error detected in the test pattern
ER
Red
Off
Error not detected
TM
Red
On
Device has been placed in test mode by local or remote user
TM
Red
Off
Device is not conducting a test

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

1184 modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	Modem
Chip Set	Unidentified
I/O Options	AC power connector, DTE/DCE serial port, network interface via ST or SMA connector
Wiring Type	Fiber optic cable
Topology	Daisy chain, star
Maximum Data Rate	128Kbps (synchronous), 19.2Kbps (asynchronous)
Data Bus	External

CONNECTIONS
Function			Label		Function		Label
Power connector		CN1		Network interface via ST connector		CN3
DTE/DCE port (quick connect module)		CN2		Power switch		SW3
Note:	Quick connect serial interface module can be configured as a V.24/RS-232, V.35, RS422/530, or X.21 port. Device is available with either a fiber ST or SMA connector (CN3)

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Modem ignores requests from DTE	S1/7	Off
Modem responds to digital loopback requests from DTE	S1/7	On
í Modem ignores requests from DTE	S1/8	Off
Modem responds to local analog loopback requests from DTE	S1/8	On

TRANSMIT CLOCK SOURCE
Source	S1/5	S1/6
í Transmit clock generated internally	On	On
Transmit clock generated internally	On	Off
Transmit clock derived from terminal interface	Off	On
Transmit clock derived from receive line signal	Off	Off

DATA RATE (ASYNCHRONOUS)
Setting	S1/1		S1/2		S1/3		S1/4
0-19.2Kbps		On		Off		Off		On

TEST SELECTOR
Function	Label	Position
Remote digital loopback initiated	SW2	1
Normal operation. Loopback not activated	SW2	2
Activates local analog loopback	SW2	3

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
TD	Red	On	Data is being transmitted (low logic level, device idle)
TD	Green	On	Data is being transmitted (high logic level)
TD	None	Off	Data is not being transmitted
RD	Red	On	Data is being received (low logic level, device idle)
RD	Green	On	Data is being received (high logic level)
RD	None	Off	Data is not being received
RTS	Green	On	RTS signal is high
RTS	Green	Off	RTS signal is low
CD	Green	On	Carrier signal detected
CD	Red	On	Carrier signal not detected
DTR	Green	On	DTR signal is high
DTR	Green	Off	DTR signal is low
NS	Red	On	Local modem not connected to remote modem
NS	Red	Off	Local modem connected to remote modem
ER	Red	On	Bit error likely in received signal or error detected in the test pattern
ER	Red	Off	Error not detected
TM	Red	On	Device has been placed in test mode by local or remote user
TM	Red	Off	Device is not conducting a test