NEWCOM, INC.
33600 EFX EXTERNAL
Card Type | Modem (asynchronous/synchronous) |
Chipset | Rockwell |
Maximum Data Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC |
Fax Modulation | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, MNP10, V.42, V.42bis |
Fax Class | Class II |
Data Bus | Serial |
CONNECTIONS | |||
Function | Label | Function | Label |
Telephone line | CN1 | DC power in | CN4 |
Telephone line | CN2 | Power switch | SW1 |
Serial port | CN3 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
TM | Red | On | Modem is performing diagnostic test |
TM | Red | Off | Modem is not performing diagnostic test |
AA | Red | On | Auto-answer enabled |
AA | Red | Off | Auto-answer disabled |
AA | Red | Blinking | Phone is ringing |
CD | Red | On | Carrier signal detected |
CD | Red | Off | Carrier signal not detected |
DIAGNOSTIC LED(S) (CON'T) | |||
LED | Color | Status | Condition |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
RD | Red | On | Modem is receiving data |
RD | Red | Off | Modem is not receiving data |
SD | Red | On | Modem is transmitting data |
SD | Red | Off | Modem is not transmitting data |
TR | Red | On | DTR signal is high |
TR | Red | Off | DTR signal is low |
MR | Red | On | Power is on |
MR | Red | Off | Power is off |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &J, &K, &L, &M, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \J, \K, \L, \N |
%C, %E, %L, %Q, %TT |
Special AT Commands |
+MS |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25 |
S26, S27, S29, S30, S31, S32, S33, S36, S38, S39, S46, S48, S82, S86, S91, S92, S95 |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See NEWCOM, INC 33600 IFX INTERNAL for a full command summary.