2430I modem/telephone/ISDN Settings and Configuration

Card Type	Modem (synchronous/asynchronous)
Chip Set	Unidentified
Maximum Data Rate	2400bps
Data Bus	External
Data Modulation Protocol	Bell ITU-T V.22, V.23

CONNECTIONS
Function	Label		Function		Label
Line out		CN1		V.24/V.35 connector		CN2
Note: The function and number of buttons is unidentified.

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Chassis ground connected to signal ground	JP1	Pins 2 & 3 closed
Chassis ground not connected to signal ground	JP1	Pins 1 & 2 closed
í RTS flow control enabled	JP2	Pins 2 & 3 closed
Software flow control enabled	JP2	Pins 1 & 2 closed
í Line in relay disabled	JP3	Pins 2 & 3 closed
Line in relay enabled	JP3	Pins 1 & 2 closed
í Factory configured - do not alter	S2/1	Unidentified
í Factory configured - do not alter	S2/2	Unidentified
í Factory configured - do not alter	S2/3	Unidentified
í Factory configured - do not alter	S2/4	Unidentified
í Factory configured - do not alter	S2/5	Unidentified
Line impedance set to 600 ohms	S2/6	On
Line impedance set to 900 ohms	S2/6	Off

LINE TYPE
Setting	JP4	JP5
í Switched line	Pins 1 & 2 closed	Pins 2 & 3 closed
Leased line	Pins 2 & 3 closed	Pins 1 & 2 closed

TRANSMISSION LEVEL
Setting	S2/1	S2/2	S2/3	S2/4
0dBm	Off	Off	Off	Off
-1dBm	On	Off	Off	Off
-2dBm	Off	On	Off	Off
-3dBm	On	On	Off	Off
-4dBm	Off	Off	On	Off
-5dBm	On	Off	On	Off
-6dBm	Off	On	On	Off
-7dBm	On	On	On	Off
-8dBm	Off	Off	Off	On
-9dBm	On	Off	Off	On
-10dBm	Off	On	Off	On
-11dBm	On	On	Off	On
-12dBm	Off	Off	On	On
-13dBm	On	Off	On	On
-14dBm	Off	On	On	On
-15dBm	On	On	On	On