MODEMSURFR 56K (INTERNAL) modem/telephone/ISDN Settings and Configuration

MOTOROLA, INC.

MODEMSURFR 56K (INTERNAL)

Card Type
Modem (asynchronous)
Chip Set
Rockwell
Maximum Modem Rate
56Kbps
Maximum Fax Rate
14.4Kbps
Data Modulation Protocol
Bell 103A/212A
ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34
Rockwell V.FC, K56+
Fax Modulation Protocol
ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression
MNP5, V.42, V.42bis
Fax Class
Class I
Data Bus
16-bit ISA
Card Size
Three-quarter length, full-height

CONNECTIONS
Function
Label
Function
Label
Telephone line
CN1
Telephone line
CN2

SUPPORTED STANDARD COMMANDS
Basic AT Commands
+++, ‘comma’, A/
A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z
&C, &D, &F, &G, &K, &P, &R, &S, &T, &V, &W, &Y, &Z
Extended AT Commands
\A, \B, \K, \N, \V
%C, %E, %L, %Q
Special AT Commands
#CID, +MS
S-Registers
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25
S26, S27, S28, S29, S30, S32, S33, S36, S38, S39, S40, S46, S48, S82, S86, S91, S92, S95
Note: See MHI help file for complete information.

UNIDENTIFIED COMMANDS
Command
Default
+ES=nnn
3,0,2
+ESA=nnnnnnnn
0,0,0,0,0,0,0,0
+ITF=nn
255,64

Proprietary AT Command Set

BIT-MAPPED REGISTER S31
Format:
AT [cmds] S31=n [cmds]
Default:
2
Range:
0 - 43
Description:
Select automode, extended result code format, and caller ID format.
Bit
Value
Function
0
í 0
1
Extended result codes controlled by S95.
Extended result codes set for single-line format.
1
0
í 1
Auto-mode detection disabled
In originate mode, handshake begins at line speed designated by the S37 register. Modem can shift to a slower speed if necessary.
In answer mode, handshake attempted with the following protocols in order - V.FC, V.32bis, V.32, V.22bis, V.22 or Bell 212, V.21, and Bell 103
3, 2
í 00
01
10
Enables CONNECT result codes to report DTE speed
Full reporting of CONNECT result codes
Enables CONNECT result codes to report DCE speed
5, 4
í 00
01
10
Caller ID disabled.
Caller ID displays formatted data.
Caller ID displays raw hexadecimal data.

BIT-MAPPED REGISTER S41
Format
AT [cmds] S41=n [cmds]
Default:
71
Range:
0 - 71
Description:
Selects compression and auto-retrain.
Bit
Value
Function
1, 0
00
01
10
í 11
Data compression disabled.
MNP5 enabled.
V.42bis enabled.
MNP5 and V.42bis enabled.
6, 2
00
01
í 11
Auto-retrain disabled.
Auto-retrain enabled.
Auto-fallback/fall-forward enabled.
5 - 3
000
Not used.

DIAL
Type:
Immediate
Format:
AT [cmds] D<#>;[cmds]
Description:
Dials the telephone number indicated according to any modifiers included in the string.
Command
Function
DL
Re-dial last number.
DP
Pulse dialing enabled.
DS=n
Dial stored telephone number n.
DT
Tone dialing enabled.
DW
Dialing resumed following dial tone detection.
D,
Dialing paused for amount of time specified in S8 register.
D>
Transmit grounding pulse.
D!
Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook.
D@
Wait for Quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string.
D&
Wait for prompt tone detection function enabled. Waits for prompt tone for amount of time specified by the S7 command.
D*
Toggles calling tone on or off for this call.
D;
Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command.

DISPLAY BLACKLIST NUMBERS
Type:
Immediate
Format:
AT [cmds] *B [cmds]
Description:
Displays the list of all the numbers on the blacklist and their statuses.

DISPLAY DELAYED NUMBERS
Type:
Immediate
Format:
AT [cmds] *D [cmds]
Description:
Displays the list of all delayed numbers and their statuses.

DISPLAY INFORMATION
Type:
Immediate
Format:
AT [cmds] In [cmds]
Description:
Displays information requested about the modem.
Command
Function
I0
Displays product identification code.
I1
Displays ROM checksum.
I2
Tests and displays ROM checksum result.
I3
Displays firmware revision, model, and interface.
I4
Displays product name.
I5
Displays country code.
I6
Displays data pump model and revision.

DISTINCTIVE RING
Format:
AT [cmds] -SDR=n [cmds]
Default:
Unidentified
Range:
0 - 7
Description:
Selects which distinctive ring signals the modem will respond to.
Bit
Value
Function
0
0
1
Do not respond to distinctive ring type 1.
Respond to distinctive ring type 1.
1
0
1
Do not respond to distinctive ring type 2.
Respond to distinctive ring type 2.
2
0
1
Do not respond to distinctive ring type 3.
Respond to distinctive ring type 3.

RPI CONFIGURATION
Type:
Configuration
Format:
AT [cmds] +Hn [cmds]
Description:
Configures the Rockwell Protocol Interface.
Command
Function
+H0
RPI disabled.
+H1
RPI enabled and local serial port speed set to 19.2Kbps.
+H2
RPI enabled and local serial port speed set to 38.4Kbps.
+H3
RPI enabled and local serial port speed set to 57.6Kbps.
+H11
RPI+ enabled.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

MODEMSURFR 56K (INTERNAL) modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	Modem (asynchronous)
Chip Set	Rockwell
Maximum Modem Rate	56Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation Protocol	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC, K56+
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Fax Class	Class I
Data Bus	16-bit ISA
Card Size	Three-quarter length, full-height

CONNECTIONS
Function	Label	Function	Label
Telephone line	CN1	Telephone line	CN2

UNIDENTIFIED COMMANDS
Command	Default
+ES=nnn	3,0,2
+ESA=nnnnnnnn	0,0,0,0,0,0,0,0
+ITF=nn	255,64

BIT-MAPPED REGISTER S31
Format:		AT [cmds] S31=n [cmds]
Default:		2
Range:		0 - 43
Description:		Select automode, extended result code format, and caller ID format.
Bit	Value		Function
0	í 0 1		Extended result codes controlled by S95. Extended result codes set for single-line format.
1	0 í 1		Auto-mode detection disabled In originate mode, handshake begins at line speed designated by the S37 register. Modem can shift to a slower speed if necessary. In answer mode, handshake attempted with the following protocols in order - V.FC, V.32bis, V.32, V.22bis, V.22 or Bell 212, V.21, and Bell 103
3, 2	í 00 01 10		Enables CONNECT result codes to report DTE speed Full reporting of CONNECT result codes Enables CONNECT result codes to report DCE speed
5, 4	í 00 01 10		Caller ID disabled. Caller ID displays formatted data. Caller ID displays raw hexadecimal data.

BIT-MAPPED REGISTER S41
Format		AT [cmds] S41=n [cmds]
Default:		71
Range:		0 - 71
Description:		Selects compression and auto-retrain.
Bit	Value	Function
1, 0	00 01 10 í 11	Data compression disabled. MNP5 enabled. V.42bis enabled. MNP5 and V.42bis enabled.
6, 2	00 01 í 11	Auto-retrain disabled. Auto-retrain enabled. Auto-fallback/fall-forward enabled.
5 - 3	000	Not used.

DIAL
Type:	Immediate
Format:	AT [cmds] D<#>;[cmds]
Description:	Dials the telephone number indicated according to any modifiers included in the string.
Command	Function
DL	Re-dial last number.
DP	Pulse dialing enabled.
DS=n	Dial stored telephone number n.
DT	Tone dialing enabled.
DW	Dialing resumed following dial tone detection.
D,	Dialing paused for amount of time specified in S8 register.
D>	Transmit grounding pulse.
D!	Flash function initiated. Modem commanded to go off-hook for specified time before returning on-hook.
D@	Wait for Quiet Answer function enabled. Modem waits until a "quiet answer," a ring-back signal followed by silence up to the time specified in S7, is received prior to executing the rest of the dial string.
D&	Wait for prompt tone detection function enabled. Waits for prompt tone for amount of time specified by the S7 command.
D*	Toggles calling tone on or off for this call.
D;	Modem returned to idle state after dialing. The semicolon can only be placed at the end of the dial command.

DISPLAY BLACKLIST NUMBERS
Type:	Immediate
Format:	AT [cmds] *B [cmds]
Description:	Displays the list of all the numbers on the blacklist and their statuses.

DISPLAY DELAYED NUMBERS
Type:	Immediate
Format:	AT [cmds] *D [cmds]
Description:	Displays the list of all delayed numbers and their statuses.

DISPLAY INFORMATION
Type:	Immediate
Format:	AT [cmds] In [cmds]
Description:	Displays information requested about the modem.
Command	Function
I0	Displays product identification code.
I1	Displays ROM checksum.
I2	Tests and displays ROM checksum result.
I3	Displays firmware revision, model, and interface.
I4	Displays product name.
I5	Displays country code.
I6	Displays data pump model and revision.

DISTINCTIVE RING
Format:		AT [cmds] -SDR=n [cmds]
Default:		Unidentified
Range:		0 - 7
Description:		Selects which distinctive ring signals the modem will respond to.
Bit	Value		Function
0	0 1		Do not respond to distinctive ring type 1. Respond to distinctive ring type 1.
1	0 1		Do not respond to distinctive ring type 2. Respond to distinctive ring type 2.
2	0 1		Do not respond to distinctive ring type 3. Respond to distinctive ring type 3.

RPI CONFIGURATION
Type:	Configuration
Format:	AT [cmds] +Hn [cmds]
Description:	Configures the Rockwell Protocol Interface.
Command		Function
+H0		RPI disabled.
+H1		RPI enabled and local serial port speed set to 19.2Kbps.
+H2		RPI enabled and local serial port speed set to 38.4Kbps.
+H3		RPI enabled and local serial port speed set to 57.6Kbps.
+H11		RPI+ enabled.