ENHANCED DUAL T1/E1 REV 3.1 modem/telephone/ISDN Settings and Configuration

Card Type	T1/E1 DSU
Chip Set	Mitel
I/O Options	MVIP bus
Maximum Transfer Rate	1.544Mbps x 2, 2.048Mbps x 2
Data Bus	16-bit ISA
Data Modulation Protocol	Unidentified

CONNECTIONS
Function	Label	Function	Label
T1/E1 line 1	J7	Handset	J9
T1/E1 line 2	J8	MVIP bus	P7

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	IRQ driver terminated	P5/A	Closed
	IRQ driver not terminated	P5/A	Open
»	Factory configured - do not alter	P14/E	N/A
»	Factory configured - do not alter	P14/F	N/A

BASE I/O ADDRESS
Setting		S3/1	S3/2	S3/3	S3/4
	0200h	On	On	On	Off
»	0300h	On	On	On	On
	2200h	On	On	Off	Off
	2300h	On	On	Off	On
	4200h	On	Off	On	Off
	4300h	On	Off	On	On
	6200h	On	Off	Off	Off
	6300h	On	Off	Off	On
	8200h	Off	On	On	Off
	8300h	Off	On	On	On
	A200h	Off	On	Off	Off
	A300h	Off	On	Off	On
	C200h	Off	Off	On	Off
	C300h	Off	Off	On	On
	E200h	Off	Off	Off	Off
	E300h	Off	Off	Off	On

INTERRUPT
Setting	P5/B	P5/C	P5/D	P5/E	P5/F
IRQ3	Closed	Open	Open	Open	Open
IRQ4	Open	Closed	Open	Open	Open
IRQ5	Open	Open	Closed	Open	Open
IRQ6	Open	Open	Open	Closed	Open
IRQ7	Open	Open	Open	Open	Closed
IRQ9	Open	Open	Open	Open	Open
IRQ10	Open	Open	Open	Open	Open
IRQ11	Open	Open	Open	Open	Open
IRQ12	Open	Open	Open	Open	Open
IRQ14	Open	Open	Open	Open	Open
IRQ15	Open	Open	Open	Open	Open

INTERRUPT (CON’T)
Setting	P6/A	P6/B	P6/C	P6/D	P6/E	P6/F
IRQ3	Open	Open	Open	Open	Open	Open
IRQ4	Open	Open	Open	Open	Open	Open
IRQ5	Open	Open	Open	Open	Open	Open
IRQ6	Open	Open	Open	Open	Open	Open
IRQ7	Open	Open	Open	Open	Open	Open
IRQ9	Closed	Open	Open	Open	Open	Open
IRQ10	Open	Closed	Open	Open	Open	Open
IRQ11	Open	Open	Closed	Open	Open	Open
IRQ12	Open	Open	Open	Closed	Open	Open
IRQ14	Open	Open	Open	Open	Closed	Open
IRQ15	Open	Open	Open	Open	Open	Closed

LINE 1 WIRE PAIRS
Setting		P9	P12
»	Normal	Pins 1 & 3, 2 & 4 closed	Pins 1 & 3, 2 & 4 closed
	Reversed	Pins 1 & 2, 3 & 4 closed	Pins 1 & 2, 3 & 4 closed

LINE 2 WIRE PAIRS
Setting		P10	P13
»	Normal	Pins 1 & 3, 2 & 4 closed	Pins 1 & 3, 2 & 4 closed
	Reversed	Pins 1 & 2, 3 & 4 closed	Pins 1 & 2, 3 & 4 closed

ISDN LINE TERMINATION
Setting		P14/A	P14/B	P14/C	P14/D
»	Terminated	Closed	Closed	Closed	Closed
	Not terminated	Open	Open	Open	Open