LUCENT TECHNOLOGIES
RDSP/9432-I, RDSP/9464-I
Card Type | Telephony |
I/O Options | Telephone in/out (4) |
Data Bus | 8/16-bit ISA |
CONNECTIONS | |||
Function | Label | Function | Label |
Daisy-chain connector | J1 | Line 4 | J5 |
Line 1 | J2 | Audio out | J6 |
Line 2 | J3 | Analog signal ground | W11 |
Line 3 | J4 | Digital signal ground | W12 |
BASE I/O ADDRESS | |||||||||||
Setting | W1/A | W1/B | W1/C | W1/D | W1/E | W1/F | W1/G | W1/H | W1/I | W1/J | |
000h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | |
001h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open | |
002h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open | Closed | |
003h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open | Open | |
004h | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Open | Closed | Closed | |
» | 300h | Open | Open | Closed | Closed | Closed | Closed | Closed | Closed | Closed | Closed |
3FBh | Open | Open | Open | Open | Open | Open | Open | Closed | Open | Open | |
3FCh | Open | Open | Open | Open | Open | Open | Open | Open | Closed | Closed | |
3FDh | Open | Open | Open | Open | Open | Open | Open | Open | Closed | Open | |
3FEh | Open | Open | Open | Open | Open | Open | Open | Open | Open | Closed | |
3FFh | Open | Open | Open | Open | Open | Open | Open | Open | Open | Open | |
Note: A total of 1023 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. W1/A is the Most Significant Bit and jumper W1/J is the Least Significant Bit. The jumpers have the following decimal values: W1/A=512, W1/B=256, W1/C=128, W1/D=64, W1/E=32, W1/F=16, W1/G=8, W1/H=4, W1/I=2, W1/J=1. Open the jumpers and add the values of the open jumpers to obtain the correct memory address. (Open=1, Closed=0) |