LOGICODE TECHNOLOGY, INC.
9600 FAX EXTERNAL
Card Type | Modem (asynchronous) |
Chipset | Unidentified |
Maximum Data Rate | 9600bps |
Maximum Fax Rate | 9600bps |
Data Modulation | Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.32 |
Fax Modulation | ITU-T V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
Fax Class | Class I & II |
Data Bus | Serial |

CONNECTIONS | |||
Function | Label | Function | Label |
Telephone line in | CN1 | Serial port | CN3 |
Telephone line out | CN2 | DC power in | CN4 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
HS | Green | On | Modem is operating at 4800bps or faster |
HS | Green | Off | Modem is operating at slower than 4800bps |
AA | Green | On | Auto-answer enabled |
AA | Green | Off | Auto-answer disabled |
AA | Green | Blinking | Phone is ringing |
CD | Green | On | Carrier signal detected |
CD | Green | Off | Carrier signal not detected |
OH | Green | On | Modem is off-hook |
OH | Green | Off | Modem is on-hook |
RD | Green | Blinking | Modem is receiving data |
RD | Green | Off | Modem is not receiving data |
SD | Green | Blinking | Modem is transmitting data |
SD | Green | Off | Modem is not transmitting data |
TR | Green | On | DTR signal is high |
TR | Green | Off | DTR signal is low |
MR | Green | On | Power is on |
MR | Green | Off | Power is off |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, C, D, E, F, H, L, M, N, P, Q, T, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &L, &P, &R, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \V, \X, \Y, \Z |
%A, %C, %E, %G |
Special AT Commands |
-C, -J, "H, "O |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 |
S27, S30, S37, S95 |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See LOGICODE TECHNOLOGY, INC. 9600 EXTERNAL for a full command summary.