GLOBAL VILLAGE COMMUNICATIONS
TELEPORT 33.6 SPEAKERPHONE
Card Type | Modem (synchronous/asynchronous) |
Chipset | Unidentified |
I/O Options | Microphone in, speaker out, voice, speakerphone |
Maximum Data Rate | 33.6Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Modulation | Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell K56+ |
Fax Modulation | ITU-T V.17, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
Fax Class | Class I |
Data Bus | Serial |

CONNECTIONS | |||
Function | Label | Function | Label |
Speakerphone button | BT1 | DC power in | CN5 |
Mute button | BT2 | Serial port | CN6 |
Speaker out | CN1 | Microphone | MIC |
Microphone in | CN2 | Volume control | R1 |
Telephone line out | CN3 | Power switch | SW1 |
Telephone line in | CN4 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Unidentified | On | Modem is in speakerphone mode |
LED1 | Unidentified | Off | Modem is not in speakerphone mode |
LED2 | Unidentified | On | Microphone is muted |
LED2 | Unidentified | Blinking | Voice messages are waiting |
LED2 | Unidentified | Off | Microphone is not muted and no messages are waiting |
LED3 | Unidentified | On | Power is on |
LED3 | Unidentified | Blinking | Modem is transmitting or receiving data |
LED3 | Unidentified | Off | Power is off |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, ‘comma’, A/ |
A, D, E, H, L, M, N, Q, V, W, X, Y, Z |
&C, &D, &F, &G, &K, &L, &M, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
Extended AT Commands |
\A, \B, \C, \G, \J, \K, \N, \Q, \T, \V, \X |
%A, %C, %E, %G |
Special AT Commands |
-C, "H, -J, -K, "N, "O |
S-Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S26 |
S27, S30, S95 |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
See GLOBAL VILLAGE COMMUNICATIONS TELEPORT 33.6 INTERNET for a full command summary.