EVERCOM 24 modem/telephone/ISDN Settings and Configuration
EVEREX SYSTEMS, INC.
EVERCOM 24
Modem Type | Data |
Maximum Data Rate | 2400 bps |
Maximum Fax Rate | N/A |
Data Bus | 8-bit ISA |
Fax Class | Class II |
Data Modulation Protocol | Bell 103A & 212A, CCITT V.22 & V.22bis & V.21 |
Fax Modulation Protocol | N/A |
Error Correction/Compression | Unidentified |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Line out | CN1 | Line in | CN2 |
COM PORT SETTINGS | ||
COM | SW1/1 | SW1/2 |
COM1 | Off | Off |
COM2 | On | Off |
COM3 | Off | On |
COM4 | On | On |
&H PROPRIETARY COMMAND | |
Note: | The &H displays help information. |
Command | Protocol |
&H0 | Display the AT command set summary. |
&H1 | Display the S-register summary. |
&H2 | Display the Dial command summary |
Dn PROPRIETARY COMMAND | |
Note: | The Dn dialing command. |
Command | Protocol |
D; | Dial then return to command state, leaving the speaker on. |
D/ | Causes a 1/8th of second pause in the dialing string |
Fn PROPRIETARY COMMAND | |
Note: | The Fn Full duplex commands. |
Command | Protocol |
F1 | Forces the modem to not echo data you are sending to the monitor. |
F0 | Forces the modem to echo data you are sending to the monitor. |
&E PROPRIETARY COMMAND | |
Note: | The &E TELSET Off hook toggle. |
Command | Protocol |
&E0 | TELSET Off hook messages are enabled. |
&E1 | TELSET Off hook messages are disabled. |
My Books
