EICONCARD S52 modem/telephone/ISDN Settings and Configuration

EICON TECHNOLOGY CORPORATION

EICONCARD S52

Card Type
ISDN TA
Chip Set
Motorola
Transfer Rate
2.048Mbps
ISDN Protocol
PPP, SDLC, HDLC
Error Correction/Compression
Generic Lempel-Ziv
I/O Options
Daughterboard headers
Switch Type
Unidentified
Data Bus
16-bit ISA

CONNECTIONS
Function
Label
Function
Label
V.24, V.35, or X.21 via DB-26 connector
CN1
Compression daughterboard header
CN3
V.24, V.35, or X.21 via DB-26 connector
CN2
Compression daughterboard header
CN4

USER CONFIGURABLE SETTINGS
Setting
Label
Position
»
V.24 or V.35 interface via CN1
JP1
Pins 1 & 2 closed

X.21 interface via CN1
JP1
Pins 2 & 3 closed
»
V.24 or V.35 interface via CN2
JP2
Pins 1 & 2 closed

X.21 interface via CN2
JP2
Pins 2 & 3 closed
»
Card will use primary I/O address
SW1/1
Off

Card will use secondary I/O address
SW1/1
On
Note: A single-block jumper is provided for JP1 and JP2. All 1 & 2 pins or all 2 & 3 pins are closed simultaneously.

BASE I/O ADDRESS
Primary
Secondary
SW1/2
SW1/3
SW1/4

278h
678h
Off
Off
Off

280h
680h
Off
Off
On

378h
778h
Off
On
Off
»
380h
780h
Off
On
On

380h
780h
On
Off
Off

388h
788h
On
Off
On

390h
790h
On
On
Off

398h
798h
On
On
On
Note: If a card is set to use a secondary address, no other card in the system may be set to its associated primary address except for another EiconCard.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

EICONCARD S52 modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	ISDN TA
Chip Set	Motorola
Transfer Rate	2.048Mbps
ISDN Protocol	PPP, SDLC, HDLC
Error Correction/Compression	Generic Lempel-Ziv
I/O Options	Daughterboard headers
Switch Type	Unidentified
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
V.24, V.35, or X.21 via DB-26 connector	CN1	Compression daughterboard header	CN3
V.24, V.35, or X.21 via DB-26 connector	CN2	Compression daughterboard header	CN4

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	V.24 or V.35 interface via CN1	JP1	Pins 1 & 2 closed
	X.21 interface via CN1	JP1	Pins 2 & 3 closed
»	V.24 or V.35 interface via CN2	JP2	Pins 1 & 2 closed
	X.21 interface via CN2	JP2	Pins 2 & 3 closed
»	Card will use primary I/O address	SW1/1	Off
	Card will use secondary I/O address	SW1/1	On
Note: A single-block jumper is provided for JP1 and JP2. All 1 & 2 pins or all 2 & 3 pins are closed simultaneously.

BASE I/O ADDRESS
Primary		Secondary	SW1/2	SW1/3	SW1/4
	278h	678h	Off	Off	Off
	280h	680h	Off	Off	On
	378h	778h	Off	On	Off
»	380h	780h	Off	On	On
	380h	780h	On	Off	Off
	388h	788h	On	Off	On
	390h	790h	On	On	Off
	398h	798h	On	On	On
Note: If a card is set to use a secondary address, no other card in the system may be set to its associated primary address except for another EiconCard.