DIGICOM SYSTEMS
SCOUT PLUS (INTERNAL)
Card Type | Modem, Fax |
Chip Set | Unidentified |
I/O Options | Line in (RJ-11), line out (RJ11) |
Maximum Modem Rate | 14.4Kbps |
Maximum Fax Rate | 9600bps |
Data Modulation Protocol | Bell 212A, ITU-T V.22, V.22bis, V.32, V.32bis |
Fax Modulation Protocol | V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V42bis |
Fax Class | Class I & II |
Data Bus | 8-bit ISA |

CONNECTIONS | ||||||
Function | Label | Function | Label | |||
RJ-11 line | CN1 | RJ-11 line | CN2 | |||
USER CONFIGURABLE SETTINGS | ||
Function | Label | Position |
Normal operation enabled | SW1/1 | On |
Modem reset | SW1/1 | Off |
í Factory configured - do not alter | SW1/2 | Off |
SERIAL PORT ADDRESS | ||
Setting | SW1/3 | SW1/4 |
COM1 (3F8h) | Off | Off |
COM2 (2F8h) | On | Off |
COM3 (3E8h) | Off | On |
COM4 (2E8h) | On | On |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, A/, +++ |
A, E, H, M, 0, V, Z |
&F, &T, &Z |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S25, S26 |
Note: See MHI Help file for full command documentation. |
PROPRIETARY AT COMMAND SET
For a full command summary see DIGICOM SYSTEMS, SCOUT PLUS (EXTERNAL)