SUPRAEXPRESS 144 PLUS modem/telephone/ISDN Settings and Configuration
DIAMOND MULTIMEDIA SYSTEMS, INC.
SUPRAEXPRESS 144 PLUS
Card Type | Fax, Modem (synchronous/asynchronous) |
Chip Set | Rockwell |
Maximum Data Rate | 14.4Kbps |
Maximum Fax Rate | 14.4Kbps |
Data Bus | External |
Fax Class | Class I |
Data Modulation Protocol | Bell 103/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis |
Fax Modulation Protocol | ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | ||||||
Function | Label | Function | Label | |||
Line out/in - Unidentified | CN1 | DC power | CN4 | |||
Line in/out - Unidentified | CN2 | Power switch | SW1 | |||
RS-232/422 | CN3 | |||||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
PWR | Red | On | Power is on |
PWR | Red | Off | Power is off |
SD | Red | On | Modem is transmitting data |
SD | Red | Off | Modem is not transmitting data |
RD | Red | On | Modem is receiving data |
RD | Red | Off | Modem is not receiving data |
OH | Red | On | Modem is off-hook |
OH | Red | Off | Modem is on-hook |
SUPPORTED COMMAND SET |
Basic AT Commands |
AT, ‘+++’, ‘comma’, A/ |
A, E, H, L, N, O, P, R, S, T, U, V, W, Y, Z |
&A, &B, &C, &G, &J, &K, &L, &P, &R, &S, &T, &V, &W, &X, &Y, &Z |
Extended AT Commands |
\A, \B, \C, \E, \G, \J, \K, \L, \N, \O, \Q, \T, \U, \V, \W, \X, \Y, \Z |
%A, %C, %E, %L, %Q, %TT |
S Registers |
S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S38, S39, |
S46, S48, S82, S86, S90, S91, S92, S95, S99, S108, S109, S110, 201 |
Special Commands |
"H, "N, "O,-J, )M, :E, +MS?, +MS |
Note: See MHI Help File for full command documentation. |
Proprietary AT Command Set
See model SUPRAEXPRESS 288 PNP for a full command summary.
My Books
