LSI/120 modem/telephone/ISDN Settings and Configuration
DIALOGIC CORPORATION
LSI/120
Card Type | Telephony |
Chip Set | Unidentified |
I/O Options | PCM bus |
Data Bus | 16-bit ISA |
Line Type | Loop-Start |
CONNECTIONS | |||
Function | Label | Function | Label |
Telephone lines in via DB-25 connector | CN1 | Audio expansion connector | CN4 |
PCM bus | CN2 | Audio expansion connector | CN5 |
Audio expansion connector | CN3 | ||
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Board will use time slots 1-12 | SW1/1 | Off |
Board will use time slots 13-24 | SW1/1 | On | |
| » | Lines do not answer during reset condition | SW1/4 | Off |
Lines are made busy during reset condition | SW1/4 | On | |
| » | Signalling information sent to loop-start interface | SW1/6 | Off |
Signalling information sent to audio interfaces | SW1/6 | On | |
| » | Normal operation | SW2 | Off |
Loopback mode | SW2 | On | |
| » | Factory configured - do not alter | SW1/2 | Off |
| » | Factory configured - do not alter | SW1/3 | Off |
| » | Factory configured - do not alter | SW1/5 | Off |
My Books
