GAMMAFAX CP-4/SC modem/telephone/ISDN Settings and Configuration

Card Type	Fax, telephony
Processor	80C188 (4)
Processor Speed	16MHz
Chipset	Rockwell 14.4EFX
Maximum Onboard Memory	2MB DRAM (512KB per channel)
I/O Options	AEB bus, PEB/SCbus connector
Maximum Fax Rate	14.4Kbps x 4
Fax Modulation	ITU-T V.17, V.27ter, V.29, V.33
Fax Class	N/A
Data Bus	16-bit ISA
Card Size	Full height, full length

CONNECTIONS
Function	Label	Function	Label
Unidentified	CN1	Header for daughterboard CN3	CN3
Header for daughterboard CN2	CN2	AEB bus	CN4

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	SW1/1	On
»	Factory configured - do not alter	SW1/2	Off
»	Factory configured - do not alter	SW1/3	On
»	Factory configured - do not alter	SW1/4	Off
»	Factory configured - do not alter	SW1/5	On
»	Factory configured - do not alter	SW1/6	Off
»	Factory configured - do not alter	SW1/7	On
»	Factory configured - do not alter	SW1/8	Off
»	Factory configured - do not alter	SW1/9	Off
»	Factory configured - do not alter	SW1/10	Off
»	Factory configured - do not alter	SW2/1	Off
»	Factory configured - do not alter	SW2/2	Off
»	Factory configured - do not alter	SW2/3	Off
»	Factory configured - do not alter	SW2/4	Off

USER CONFIGURABLE SETTINGS (CON'T)
Setting		Label	Position
»	Factory configured - do not alter	SW2/5	Off
»	Factory configured - do not alter	SW2/6	Off
»	Factory configured - do not alter	SW2/7	Off
»	Factory configured - do not alter	SW2/8	Off
»	Factory configured - do not alter	SW2/9	Off
»	Factory configured - do not alter	SW2/10	Off
»	Factory configured - do not alter	SW3/5	Off
»	Factory configured - do not alter	SW4/1	Unidentified
»	Factory configured - do not alter	SW4/2	Unidentified
»	Factory configured - do not alter	SW4/3	Unidentified
»	Factory configured - do not alter	SW4/4	Unidentified
»	Factory configured - do not alter	SW4/5	Unidentified
»	Factory configured - do not alter	SW4/6	Unidentified
»	Factory configured - do not alter	SW4/7	Unidentified
»	Factory configured - do not alter	SW4/8	Unidentified
»	Factory configured - do not alter	SW4/9	Unidentified
»	Factory configured - do not alter	SW4/10	Unidentified

BASE I/O ADDRESS SELECTION
Line 1	Line 2	Line 3	Line 4	Channels	SW3/1	SW3/2	SW3/3	SW3/4
350h	360h	370h	250h	0 - 3	On	On	On	On
260h	270h	150h	160h	4 - 7	Off	On	On	On
100h	104h	108h	10Ch	8 - 11	On	Off	On	On
110h	114h	118h	11Ch	12 - 15	Off	Off	On	On
280h	284h	288h	28Ch	16 - 19	On	On	Off	On
290h	294h	298h	29Ch	20 - 23	Off	On	Off	On
120h	124h	128h	12Ch	24 - 27	On	Off	Off	On
130h	134h	138h	13Ch	28 - 31	Off	Off	Off	On
180h	184h	188h	18Ch	32 - 35	On	On	On	Off
190h	194h	198h	19Ch	36 - 39	Off	On	On	Off
1A0h	1A4h	1A8h	1ACh	40 - 43	On	Off	On	Off
1B0h	1B4h	1B8h	1BCh	44 - 47	Off	Off	On	Off
1C0h	1C4h	1C8h	1CCh	48 - 51	On	On	Off	Off
1D0h	1D4h	1D8h	1DCh	52 - 55	Off	On	Off	Off
1E0h	1E4h	1E8h	1ECh	56 - 59	On	Off	Off	Off
254h	258h	25Ch	264h	60 - 63	Off	Off	Off	Off

CONNECTIONS
Function	Label	Function	Label
SCBus/PEB connector	CN1	Header to main board CN3	CN3
Header to main board CN2	CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
PEB bus is terminated	RP1	Installed
PEB bus is not terminated	RP1	Not installed
Board is not attached to LSI-80 card	SW1/2	On
Board is attached to LSI-80 card	SW1/2	Off
Board will use mu-law compression	SW1/5	On
Board will use A-law compression	SW1/5	Off

BUS TYPE SELECTION
Setting	SW1/1	SW1/3
PEB bus	On	On
SCBus	Off	Off

SIGNALING TYPE
Setting	SW1/4	SW1/6
All signaling disabled	N/A	Off
Raw-bit signaling disabled	Off	On
Raw-bit signaling enabled when applicable	On	On