CALPAK CORPORATION modem/telephone/ISDN Settings and Configuration
CALPAK CORPORATION
MX-2496
Modem Type | Data (synchronous/asynchronous)/Fax |
Maximum Data Rate | 2400bps |
Maximum Fax Rate | 9600bps |
Data Bus | 8-bit ISA |
Fax Class | Unidentified |
Data Modulation Protocol | Unidentified |
Fax Modulation Protocol | ITU-T V.21CH2, V.27ter, V.29 |
Error Correction/Compression | MNP5, V.42, V.42bis |
CONNECTIONS | |||
Purpose | Location | Purpose | Location |
Line out | CN1 | Line in | CN2 |
BASE I/O ADDRESS SELECTION | ||||
Port | SW1/A | SW1/C | SW1/E | SW1/F |
| » COM1: (3F8h) | Off | On | Off | On |
| COM2: (2F8h) | On | Off | Off | On |
| COM3: (3E8h) | Off | On | On | Off |
| COM4: (2E8h) | On | Off | On | Off |
INTERRUPT SELECTION | |||
IRQ | SW/B | SW1/D | JP1 |
| 3 | On | Off | Pins 2 & 4 closed |
| » 4 | Off | On | Pins 2 & 4 closed |
| 5 | Off | Off | Pins 3 & 4 closed |
| 7 | Off | Off | Pins 1 & 2 closed |
Note: Location of JP1 is unidentified. | |||
Proprietary AT Command Set
See document V1558 for a full command summary.
My Books
