BIANCA/BRI modem/telephone/ISDN Settings and Configuration

Card Type	ISDN TA
Chipset	Unidentified
I/O Options	Audio connector
ISDN Transfer Rate	56Kbps x 2/64Kbps x 2
ISDN Protocol	CISCO HDLC, HDLC, T.70, UIFRAMES, X.25, X.30, X.75, PPP
Switch Type	1TR6, DSS1, NET-3, NI-1, VN3
Data Bus	16-bit ISA
Card Size	Full height, half length

CONNECTIONS
Function	Label	Function	Label
ISDN S/T interface	CN1	Audio connector	CN3
ISDN U interface	CN2

INTERRUPT SELECTION
Setting		J1/A	J1/B	J1/C	J1/D	J1/E	J1/F
	2/9	Closed	Open	Open	Open	Open	Open
	3	Open	Open	Open	Open	Open	Closed
	4	Open	Open	Open	Open	Closed	Open
	5	Open	Open	Open	Closed	Open	Open
	6	Open	Open	Closed	Open	Open	Open
	7	Open	Closed	Open	Open	Open	Open
»	10	Open	Open	Open	Open	Open	Open
	11	Open	Open	Open	Open	Open	Open
	12	Open	Open	Open	Open	Open	Open
	14	Open	Open	Open	Open	Open	Open
	15	Open	Open	Open	Open	Open	Open

INTERRUPT SELECTION (CON'T)
Setting		J2/A	J2/B	J2/C	J2/D	J2/E
	2/9	Open	Open	Open	Open	Open
	3	Open	Open	Open	Open	Open
	4	Open	Open	Open	Open	Open
	5	Open	Open	Open	Open	Open
	6	Open	Open	Open	Open	Open
	7	Open	Open	Open	Open	Open
»	10	Closed	Open	Open	Open	Open
	11	Open	Closed	Open	Open	Open
	12	Open	Open	Closed	Open	Open
	14	Open	Open	Open	Closed	Open
	15	Open	Open	Open	Open	Closed

BASE I/O ADDRESS SELECTION
Setting		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7	SW1/8	SW1/9	SW1/10
	00000h	On	On	On	On	On	On	On	On	On	On
	00400h	Off	On	On	On	On	On	On	On	On	On
	00800h	On	Off	On	On	On	On	On	On	On	On
	00C00h	Off	Off	On	On	On	On	On	On	On	On
	01000h	On	On	Off	On	On	On	On	On	On	On
»	0D000h	Off	On	Off	Off	On	On	On	On	Off	On
	FE000h	Off	Off	On	Off	Off	Off	Off	Off	Off	Off
	FF000h	On	On	Off	Off	Off	Off	Off	Off	Off	Off
	FF400h	Off	On	Off	Off	Off	Off	Off	Off	Off	Off
	FF800h	On	Off	Off	Off	Off	Off	Off	Off	Off	Off
	FFC00h	Off	Off	Off	Off	Off	Off	Off	Off	Off	Off
Note: A total of 1024 base address settings are available. The switches are a binary representation of the decimal memory addresses. SW1/10 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: SW1/10=524,288, SW1/9=262,144, SW1/8=131,072, SW1/7=65,536, SW1/6=32,768, SW1/5=16,384, SW1/3=8,192, SW1/3=4,096, SW1/2=2,048, SW1/1=1,024. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0)

DIAGNOSTIC LED(S)

The functions and colors of the LEDs are unidentified.