SMART ONE 56X modem/telephone/ISDN Settings and Configuration

Card Type	Modem (asynchronous)
Chipset	Unidentified
Maximum Data Rate	56Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation	Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell K56flex
Fax Modulation	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, MNP10EC, V.42, V.42bis
Fax Class	Class I
Data Bus	Serial

CONNECTIONS
Function	Label	Function	Label
AC power in	CN1	Telephone line out	CN4
Serial port	CN2	Power switch	SW1
Telephone line in	CN3

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
AA	Unidentified	On	Auto-answer enabled
AA	Unidentified	Off	Auto-answer disabled
CD	Unidentified	On	Carrier signal detected
CD	Unidentified	Off	Carrier signal not detected
RD	Unidentified	On	Modem is receiving data
RD	Unidentified	Off	Modem is not receiving data
SD	Unidentified	On	Modem is transmitting data
SD	Unidentified	Off	Modem is not transmitting data
TR	Unidentified	On	DTR signal is high
TR	Unidentified	Off	DTR signal is low
RI	Unidentified	On	Phone is ringing
RI	Unidentified	Off	Phone is not ringing
OH	Unidentified	On	Modem is off-hook
OH	Unidentified	Off	Modem is on-hook
*	Unidentified	On	Power is on
*	Unidentified	Off	Power is off

MISCELLANEOUS TECHNICAL NOTES

A front panel diagram is not available.

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, O, Q, V, W, X, Y, Z

&C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z

Extended AT Commands

\A, \B, \K, \N, \V

%C, %E, %L, %Q

Special AT Commands

#CID, :E, -K, @M

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S22, S24, S25, S26, S27

S29, S30, S31, S32, S33, S36, S38, S46, S48, S82, S86, S91, S92, S95

Note: See MHI help file for complete information.

UNIDENTIFIED COMMANDS
Command	Default
S21	52
S23	62
S28	0
S37	0
S40	104
S41	195