SEVEL 1414I-T modem/telephone/ISDN Settings and Configuration

Card Type	Modem (asynchronous)
Chip Set	Rockwell ATi
I/O Options	None
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	Unidentified
Fax Class	Class I
Data Modulation Protocol	Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis
Fax Modulation Protocol	Unidentified
Error Correction/Compression	RPI

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Factory configured - do not alter	SW1/7	Unidentified
í Factory configured - do not alter	SW1/8	N/A
Note: SW1/8 may not be present on all models.

INTERRUPT SELECTION
Setting	SW1/1	SW1/2	SW1/3	SW1/4
í IRQ3	Off	Off	Off	On
IRQ4	Off	Off	On	Off
IRQ5	Off	On	Off	Off
IRQ7	On	Off	Off	Off

SERIAL PORT ADDRESS SELECTION
Setting	SW1/5	SW1/6
3F8h (COM1:)	On	On
2F8h (COM2:)	Off	On
3E8h (COM3:)	On	Off
í 2E8h (COM4:)	Off	Off

MISCELLANEOUS TECHNICAL NOTE

Diagram not available.

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z

&C, &D, &F, &G, &K, &L, &Q, &R, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\G, \K, \N

%E, %L, %Q

Special AT Commands

#CID

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, S16, S18, S21, S22, S23, S25, S26, S27

S28, S29, S30, S31, S32, S33, S95

Note: See MHI documentation for complete information. Registers S39, S40, and S41 are unidentified bit-mapped registers.