TSU IQ modem/telephone/ISDN Settings and Configuration

Card Type	T1 DSU with Frame Relay Monitoring
Chip Set	Unidentified
I/O Options	V.35 DTE port, test jack - in, test jack - out, test jack - monitor, power, control port (RJ-45), network port (RJ-45), LAN interface module
Maximum Data Rate	1.544Mbps
Line Coding	AMI, B8ZS
Framing	D4, ESF
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
Frame relay network port (RJ-45)	CN1	V.35 DTE port	CN6
Test jack - in	CN2	Power	CN7
Test jack - out	CN3	10 BaseT Ethernet interface (RJ-45)	CN8
Test jack - monitor	CN4	Power switch	SW1
VT 100 terminal port (RJ-45)	CN5

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
RS	Unidentified	On	RTS signal high
RS	Unidentified	Off	RTS signal low
CS	Unidentified	On	CTS signal high
CS	Unidentified	Off	CTS signal low
TD	Unidentified	On	Data is being transmitting from DTE
TD	Unidentified	Off	Data is not being transmitting from DTE
RD	Unidentified	On	Data is being received from network
RD	Unidentified	Off	Data is not being received from network
CD	Unidentified	On	Frame synchronization is established. Device is ready to transmit/receive data
CD	Unidentified	Off	Frame synchronization is not established. Device is not ready to transmit/receive data
ALM	Unidentified	On	Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition detected on network
ALM	Unidentified	Off	Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition not detected on network
TST	Unidentified	On	Device is conducting a test
TST	Unidentified	Off	Device is not conducting a test