ADTRAN
TSU 120
Card Type | T1 DSU/CSU |
Chip Set | Unidentified |
I/O Options | V.35 DTE port, T1 test jack - in, T1 test jack - out, T1 test jack - monitor, DTE test jack - in, DTE test jack - out, DTE test jack - monitor, RJ-48 control ports (2), T1 network interface via RJ-48, power DSX-1 DTE interface via RJ-48, Expansion module |
T1 Data Rate | 1.544Mbps |
Line Coding | AMI, B8ZS, RZ, Bipolar |
Framing | D4, ESF |
Data Bus | External |

CONNECTIONS | |||
Function | Label | Function | Label |
T1 network port (RJ-48) | CN1 | DSX-1 port (RJ-48) | CN8 |
T1 test jack - in | CN2 | Control port - chain in (RJ-48) | CN9 |
T1 test jack - out | CN3 | Control port - chain out (RJ-48) | CN10 |
T1 test jack - monitor | CN4 | V.35 DTE port | CN11 |
DTE test jack - in | CN5 | Power | CN12 |
DTE test jack - out | CN6 | Power switch | SW1 |
DTE test jack - monitor | CN7 | ||
Note: The optional expansion module may feature a switched 56K interface, voice interface, V.35, RS-232, or ISDN T1 interface | |||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
OK1 | Green | On | DSU is operating in normal mode. No errors have been detected |
OK1 | Green | Off | DSU is not in normal mode, or errors have been detected |
TST1 | Yellow | On | DSU is conducting a test |
TST1 | Yellow | Off | DSU is not conducting a test |
ALM1 | Red | On | Alarm condition has been detected on DSU |
ALM1 | Red | Off | Alarm condition has not been detected on DSU |
OK2 | Green | On | Module is operating in normal mode. No errors have been detected |
OK2 | Green | Off | Module is not in normal mode, or errors have been detected |
TST2 | Yellow | On | Module is conducting a test |
TST2 | Yellow | Off | Module is not conducting a test |
ALM2 | Red | On | Alarm condition has been detected on option ports |
ALM2 | Red | Off | Alarm condition has not been detected on option ports |
OK3 | Green | On | CSU is operating in normal mode. No errors have been detected |
OK3 | Green | Off | CSU is not in normal mode, or errors have been detected |
TST3 | Yellow | On | CSU is conducting a test |
TST3 | Yellow | Off | CSU is not conducting a test |
ERR | Red | On | Error has been detected on network. Errors include: BPV, OOF or CRC |
ERR | Red | Off | Error has not been detected on network |
ALM3 | Red | On | Alarm condition has been detected on network |
ALM3 | Red | Off | Alarm condition has not been detected on network |