T1 CSU ACE modem/telephone/ISDN Settings and Configuration

Card Type	T1 CSU
Chip Set	Unidentified
I/O Options	V.35 DTE port, test jacks (6) CPE interface via RJ-48, power T1 network interface via RJ-48
T1 Data Rate	1.544Mbps
Line Coding	AMI, B8ZS
Framing	SF, ESF
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
Test jack - monitors network signals	CN1	Test jack - network out	CN6
Test jack - monitors CPE signals	CN2	T1 network interface (RJ-48)	CN7
Test jack - CPE in (BERT test)	CN3	CPE interface (RJ-48)	CN8
Test jack - CPE out (BERT test)	CN4	Power	CN9
Test jack - network in	CN5

USER CONFIGURABLE SETTINGS
Function	Label	Position
Loopback test initiated	SW1	On
Loopback test disabled	SW1	Off

LINE ATTENUATION
Net build	SW2/1	SW2/2
0dB	On	On
-7.5dB	On	Off
-15dB	Off	On
-22.5dB	Off	Off

CABLE LENGTH SELECTION
Setting	S2/3	S2/4	S2/5
0 - 133 feet	Off	Off	On
134 - 266 feet	On	On	Off
267 - 399 feet	Off	On	Off
400 - 533 feet	On	Off	Off
534 - 655 feet	Off	Off	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
PWR	Unidentified	On	Power is on
PWR	Unidentified	Off	Power is off
NLOS	Unidentified	On	Loss of signal condition detected on network
NLOS	Unidentified	Off	Loss of signal condition not detected on network
ELOS	Unidentified	On	Loss of signal condition detected on CPE
ELOS	Unidentified	Off	Loss of signal condition not detected on CPE
LB	Unidentified	On	Device is conducting a loopback test
LB	Unidentified	Off	Device is not conducting a loopback test