EXPRESS XLT modem/telephone/ISDN Settings and Configuration

ADTRAN

EXPRESS XLT

Card Type
ISDN to Ethernet Router
Chip Set
Unidentified
I/O Options
RJ-45 ISDN BRI U interface, RJ-11 telephone port, 9-pin serial port,
10 BaseT Ethernet interface via RJ-45 connector, power
Ethernet Transfer Rate
10Mbps
ISDN Rate
1.44Mbps
ISDN Modulation Protocol
PPP, MLPPP
Error Correction/Compression
Unidentified
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
10 BaseT Ethernet interface (RJ-45)
CN1
ISDN BRI interface (RJ-45)
CN4
Telephone port (RJ-11)
CN2
Power
CN5
9-pin serial port
CN3

USER CONFIGURABLE SETTINGS
Function
Label
Position
10 BaseT Ethernet interface connected to NIC
SW1
On
10 BaseT Ethernet interface connected to Hub
SW1
Off

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
RX
Unidentified
Blinking
Data is being received from the Ethernet interface
RX
Unidentified
Off
Data is not being received from the Ethernet interface
TX
Unidentified
Blinking
Data is being transmitted to the Ethernet interface
TX
Unidentified
Off
Data is not being transmitted to the Ethernet interface
LI
Unidentified
On
Connection between Router and Hub/NIC is good
LI
Unidentified
Off
Connection between Router and Hub/NIC is broken
COL
Unidentified
On
Collisions are being detected on Ethernet interface
COL
Unidentified
Off
Collisions are not being detected on Ethernet interface
JAB
Unidentified
On
Jabber condition is being detected on Ethernet interface
JAB
Unidentified
Off
Jabber condition is not being detected on Ethernet interface
ERR
Unidentified
On
Self test or front panel test has failed
ERR
Unidentified
Off
Self test or front panel test has passed, or was not conducted
LNK
Unidentified
On
WAN link is active
LNK
Unidentified
Blinking
WAN link is being negotiated
LNK
Unidentified
On
WAN link is broken
B1
Unidentified
On
B-channel 1 data call connected
B1
Unidentified
Blinking
B-channel 1 attached device off hook or dialing
B1
Unidentified
Off
No activity on B-channel 1
B2
Unidentified
On
B-channel 2 data call connected
B2
Unidentified
Blinking
B-channel 2 attached device off hook or dialing
B2
Unidentified
Off
No activity on B-channel 2
LP
Unidentified
On
All ISDN layers are up
LP
Unidentified
Blinking (fast)
ISDN layer 1 is up; ISDN layer 2 is down
LP
Unidentified
Blinking (slow)
ISDN layer 2 is up; ISDN layer 3 is down
LP
Unidentified
Off
ISDN layer 1 is down
PWR
Unidentified
On
Power is on; unit has passed self test
PWR
Unidentified
Blinking
Unit has failed self test
PWR
Unidentified
Off
Power is off

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

EXPRESS XLT modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	ISDN to Ethernet Router
Chip Set	Unidentified
I/O Options	RJ-45 ISDN BRI U interface, RJ-11 telephone port, 9-pin serial port, 10 BaseT Ethernet interface via RJ-45 connector, power
Ethernet Transfer Rate	10Mbps
ISDN Rate	1.44Mbps
ISDN Modulation Protocol	PPP, MLPPP
Error Correction/Compression	Unidentified
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
10 BaseT Ethernet interface (RJ-45)	CN1	ISDN BRI interface (RJ-45)	CN4
Telephone port (RJ-11)	CN2	Power	CN5
9-pin serial port	CN3

USER CONFIGURABLE SETTINGS
Function	Label	Position
10 BaseT Ethernet interface connected to NIC	SW1	On
10 BaseT Ethernet interface connected to Hub	SW1	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
RX	Unidentified	Blinking	Data is being received from the Ethernet interface
RX	Unidentified	Off	Data is not being received from the Ethernet interface
TX	Unidentified	Blinking	Data is being transmitted to the Ethernet interface
TX	Unidentified	Off	Data is not being transmitted to the Ethernet interface
LI	Unidentified	On	Connection between Router and Hub/NIC is good
LI	Unidentified	Off	Connection between Router and Hub/NIC is broken
COL	Unidentified	On	Collisions are being detected on Ethernet interface
COL	Unidentified	Off	Collisions are not being detected on Ethernet interface
JAB	Unidentified	On	Jabber condition is being detected on Ethernet interface
JAB	Unidentified	Off	Jabber condition is not being detected on Ethernet interface
ERR	Unidentified	On	Self test or front panel test has failed
ERR	Unidentified	Off	Self test or front panel test has passed, or was not conducted
LNK	Unidentified	On	WAN link is active
LNK	Unidentified	Blinking	WAN link is being negotiated
LNK	Unidentified	On	WAN link is broken
B1	Unidentified	On	B-channel 1 data call connected
B1	Unidentified	Blinking	B-channel 1 attached device off hook or dialing
B1	Unidentified	Off	No activity on B-channel 1
B2	Unidentified	On	B-channel 2 data call connected
B2	Unidentified	Blinking	B-channel 2 attached device off hook or dialing
B2	Unidentified	Off	No activity on B-channel 2
LP	Unidentified	On	All ISDN layers are up
LP	Unidentified	Blinking (fast)	ISDN layer 1 is up; ISDN layer 2 is down
LP	Unidentified	Blinking (slow)	ISDN layer 2 is up; ISDN layer 3 is down
LP	Unidentified	Off	ISDN layer 1 is down
PWR	Unidentified	On	Power is on; unit has passed self test
PWR	Unidentified	Blinking	Unit has failed self test
PWR	Unidentified	Off	Power is off