DSU IQ modem/telephone/ISDN Settings and Configuration

Card Type	DSU with Frame Relay Monitoring
Chip Set	Unidentified
I/O Options	V.35 DTE port, 25-pin DTE port, power, control port (RJ-45), network port (RJ-45), LAN interface module
Maximum Data Rate	64Kbps
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
10 BaseT Ethernet interface (RJ-45)	CN1	V.35 DTE port	CN5
Frame relay network port (RJ-45)	CN2	Power	CN6
25-pin DTE port	CN3	Power switch	SW1
VT 100 terminal port (RJ-45)	CN4

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
RS	Unidentified	On	RTS signal high
RS	Unidentified	Off	RTS signal low
CS	Unidentified	On	CTS signal high
CS	Unidentified	Off	CTS signal low
TD	Unidentified	On	Data is being transmitting from DTE
TD	Unidentified	Off	Data is not being transmitting from DTE
RD	Unidentified	On	Data is being received from network
RD	Unidentified	Off	Data is not being received from network
CD	Unidentified	On	Frame synchronization is established. Device is ready to transmit/receive data
CD	Unidentified	Off	Frame synchronization is not established. Device is not ready to transmit/receive data
ALM	Unidentified	On	Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition detected on network
ALM	Unidentified	Off	Open loop, loss of frame synchronization, dial backup mode, or problem with dial backup line alarm condition not detected on network
TST	Unidentified	On	Device is conducting a test
TST	Unidentified	Off	Device is not conducting a test