DATASMART MAX E1/FE1 MODEL 72521 modem/telephone/ISDN Settings and Configuration

ADC KENTROX

DATASMART MAX E1/FE1 MODEL 72521

Card Type
E1 CSU/DSU
Chipset
Unidentified
E1 Transfer Rate
2.048Mbps
E1 Protocol
Unidentified
Frame Type
Unidentified
Data Bus
Serial

CONNECTIONS
Function
Label
Function
Label
PREVIOUS button
BT1
V.24 DCE serial control port
CN5
NEXT button
BT2
V.24 DTE serial control port
CN6
ESCAPE button
BT3
RS-449, V.35, V.36, or X.21 serial data port 1
CN7
SELECT button
BT4
RS-449, V.35, V.36, or X.21 serial data port 2
CN8
Monitor receive port
CN1
AC power in
CN9
Monitor transmit port
CN2
LCD display
LCD
E1 line out (network interface)
CN3
PCMCIA slot
SL1
RS-422 auxiliary clock port
CN4

Note:Standard RS-449, V.35 and X.21 serial ports are available on included adapter cables.

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
TXD
Yellow
On
Data port indicated by LED1-2 is receiving data from network
TXD
Yellow
Off
Data port indicated by LED1-2 is not receiving data from network
RXD
Yellow
On
Data port indicated by LED1-2 is transmitting data to network
RXD
Yellow
Off
Data port indicated by LED1-2 is not transmitting data to network
CTS
Yellow
On
Data port indicated by LED1-2 CTS is high
CTS
Yellow
Off
Data port indicated by LED1-2 CTS is low
RTS
Yellow
On
Data port indicated by LED1-2 RTS is high
RTS
Yellow
Off
Data port indicated by LED1-2 RTS is low

DIAGNOSTIC LED(S) (CON’T)
LED
Color
Status
Condition
1
Yellow
On
TXD, RXD, CTS, and RTS LEDs indicate status of data port 1
1
Yellow
Blinking
Loss of Signal detected on data port 1
1
Yellow
Off
TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 1
2
Yellow
On
TXD, RXD, CTS, and RTS LEDs indicate status of data port 2
2
Yellow
Blinking
Loss of Signal detected on data port 2
2
Yellow
Off
TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 2
DATA
Green
On
Valid data signal detected on E1 network interface
DATA
Green
Off
No valid signal detected on E1 network interface, E1 signal is out of synchronization, All Ones Signal detected, Bit Error Rate is greater than 10 -3 , or TS16 framing pattern has been lost
RED
Red
On
Loss Of Signal condition detected on E1 network interface
RED
Red
Slow blink
Alarm Indication Signal condition detected
RED
Red
Fast blink
E1 network signal is out of frame synchronization
RED
Red
Off
No red alarm conditions detected
YEL
Yellow
On
Remote Loss Of Signal or out of frame synchronization condition detected
YEL
Yellow
Off
No remote Loss Of Signal or out of frame synchronization condition detected
TEST
Yellow
On
Local loopback test in progress
TEST
Yellow
Blinking
Test code, remote loopback, or Bit Error Rate Test in progress
TEST
Yellow
Off
No tests are in progress
PWR
Green
On
Power is on
PWR
Red
On
Self-test failed
PWR
Green
Blinking
User is logged in
PWR
Alternating green/red
Blinking
Downloading software
PWR
N/A
Off
Power is off

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

DATASMART MAX E1/FE1 MODEL 72521 modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	E1 CSU/DSU
Chipset	Unidentified
E1 Transfer Rate	2.048Mbps
E1 Protocol	Unidentified
Frame Type	Unidentified
Data Bus	Serial

CONNECTIONS
Function	Label	Function	Label
PREVIOUS button	BT1	V.24 DCE serial control port	CN5
NEXT button	BT2	V.24 DTE serial control port	CN6
ESCAPE button	BT3	RS-449, V.35, V.36, or X.21 serial data port 1	CN7
SELECT button	BT4	RS-449, V.35, V.36, or X.21 serial data port 2	CN8
Monitor receive port	CN1	AC power in	CN9
Monitor transmit port	CN2	LCD display	LCD
E1 line out (network interface)	CN3	PCMCIA slot	SL1
RS-422 auxiliary clock port	CN4
Note:Standard RS-449, V.35 and X.21 serial ports are available on included adapter cables.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
TXD	Yellow	On	Data port indicated by LED1-2 is receiving data from network
TXD	Yellow	Off	Data port indicated by LED1-2 is not receiving data from network
RXD	Yellow	On	Data port indicated by LED1-2 is transmitting data to network
RXD	Yellow	Off	Data port indicated by LED1-2 is not transmitting data to network
CTS	Yellow	On	Data port indicated by LED1-2 CTS is high
CTS	Yellow	Off	Data port indicated by LED1-2 CTS is low
RTS	Yellow	On	Data port indicated by LED1-2 RTS is high
RTS	Yellow	Off	Data port indicated by LED1-2 RTS is low

DIAGNOSTIC LED(S) (CON’T)
LED	Color	Status	Condition
1	Yellow	On	TXD, RXD, CTS, and RTS LEDs indicate status of data port 1
1	Yellow	Blinking	Loss of Signal detected on data port 1
1	Yellow	Off	TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 1
2	Yellow	On	TXD, RXD, CTS, and RTS LEDs indicate status of data port 2
2	Yellow	Blinking	Loss of Signal detected on data port 2
2	Yellow	Off	TXD, RXD, CTS, and RTS LEDs do not indicate status of data port 2
DATA	Green	On	Valid data signal detected on E1 network interface
DATA	Green	Off	No valid signal detected on E1 network interface, E1 signal is out of synchronization, All Ones Signal detected, Bit Error Rate is greater than 10 -3 , or TS16 framing pattern has been lost
RED	Red	On	Loss Of Signal condition detected on E1 network interface
RED	Red	Slow blink	Alarm Indication Signal condition detected
RED	Red	Fast blink	E1 network signal is out of frame synchronization
RED	Red	Off	No red alarm conditions detected
YEL	Yellow	On	Remote Loss Of Signal or out of frame synchronization condition detected
YEL	Yellow	Off	No remote Loss Of Signal or out of frame synchronization condition detected
TEST	Yellow	On	Local loopback test in progress
TEST	Yellow	Blinking	Test code, remote loopback, or Bit Error Rate Test in progress
TEST	Yellow	Off	No tests are in progress
PWR	Green	On	Power is on
PWR	Red	On	Self-test failed
PWR	Green	Blinking	User is logged in
PWR	Alternating green/red	Blinking	Downloading software
PWR	N/A	Off	Power is off