DATALINK 56K modem/telephone/ISDN Settings and Configuration

Card Type	Modem, Fax
Chip Set	Unidentified
Maximum Modem Rate	56Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation Protocol	Unidentified
Fax Modulation Protocol	Unidentified
Error Correction/Compression	MNP5, V.42bis
Fax Class	Unidentifed
Data Bus	PCMCIA

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, E, H, V, Z

&F, &W

Note: See MHI Help File for full command documentation.

DIAL
Type:	Immediate
Format:	AT [cmds] D<#> [cmds]
Description:	Dials telephone number according to any modifiers included in the string
Note:	Any combination of modifiers can be used to produce the desired dial functions in sequence.
Command	Function
DP	Pulse dialing enabled
DT	Tone dialing enabled/Pulse dialing disabled
D,	Dialing paused for amount of time specified in S8 register

SPEAKER VOLUME
Type:	Configuration
Format:	AT [cmds] Ln [cmds]
Description:	Controls speaker volume
Command	Function
L0	Speaker disabled
L2	Volume on

SPEAKER MODE
Type:	Configuration
Format:	AT [cmds] Mn [cmds]
Description:	Selects various speaker options
Command	Function
M0	Speaker disabled
M1	Speaker enabled until carrier signal detected
M2	Speaker enabled

EXTENDED RESULT CODES
Type:	Configuration
Format:	AT [cmds] Wn [cmds]
Description:	Reports modem progress
Command	Function
W0	Enables CONNECT result codes to report modem type and DTE speed.
W1	Enables CONNECT result codes to report DTE speed, carrier, protocol, and compression
W2	Enables CONNECT result codes to report DCE speed..

DATA CARRIER DETECT (DCD)
Type:	Configuration
Format:	AT [cmds] &Cn [cmds]
Description:	Selects whether the DCD option is enabled or disabled
Command	Function
&C1	DCD enabled after carrier signal detected

DATA TERMINAL READY (DTR)
Type:	Configuration
Format:	AT [cmds] &Dn [cmds]
Description:	Selects modem response to DTR
Command	Function
&D2	DTR enabled