COMMPOWER TPF-144C modem/telephone/ISDN Settings and Configuration

Card Type	Fax, Modem (asynchronous)
Chip Set	Unidentified
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Bus	PCMCIA Type II
Fax Class	Class I
Data Modulation Protocol	Bell 103/212A ITU-T V.21, V.22, V.22bis, V.32, V.32bis
Fax Modulation Protocol	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis

BIT MAPPED REGISTERS
Register	Default	Function
S14	N/A	Bit mapped register
S16	N/A	Test modes
S18	0	Test timer
S21	N/A	Bit mapped register
S22	N/A	Bit mapped register
S23	N/A	Bit mapped register
S25	5	Detect DTR change
S26	1	RTS to CTS delay
S27	N/A	Bit mapped register
S30	10	Sleep timer
S37	0	Maximum line speed
S90	0	Inactivity timer
S108	1	Retrain signal quality selector
S109	62	Line speeds permitted

EXTENDED AT COMMANDS
Command	Default	Function
\An	3	Maximum block size for transmission
\Bn	N/A	Break send
\Cn	0	Auto-reliable time buffer configuration
\Gn	0	Flow control
\Jn	0	Lock serial port
\Kn	5	Break type
\Nn	3	Connect mode
\O	N/A	Initiate mnp reliable mode
\Qn	3	Flow control type
\Tn	0	Inactivity timer
\U	N/A	Accept mnp reliable mode
\Vn	2	Extended result codes
\Xn	0	Xon/xoff pass-through
\Y	N/A	Convert to mnp reliable mode
\Z	N/A	Switch to normal mode
%An	13	Auto-reliable fallback character
%Cn	1	Compression
%En	1	Auto-retrain
%Gn	0	Rate negotiation
%Qn	N/A	Line signal quality
"Jn	1	V.42bis - compression control
"Hn	3	V.42bis - maximum string length
"On	32	Unidentified
-Cn	0	Calling tone

AT PLUS (+) COMMANDS
Command	Function
+FMFR?	Report modem manufacturer
+FMDL?	Report product model
+FREV?	Report product revision
+FFTn	Fax transmit test
+FRTn	Fax receive test