OFFICECONNECT REMOTE 510/511 modem/telephone/ISDN Settings and Configuration

3COM CORPORATION

OFFICECONNECT REMOTE 510/511

Card Type
ISDN to Ethernet router
NIC Type
ISDN, Ethernet
Maximum Onboard Memory
Unidentified
I/O Options
RJ-45 (2), 9-pin serial port (RS-232),
BNC connector, ISDN BRI interface
Network Transfer Rate
128Kbps
Topology
Star
Wiring Type
RJ-45 Unshielded twisted pair
ISDN BRI
RG58A/U 50ohm coaxial
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
DC power connector
CN1
RJ-45 UTP connector
CN4
9-pin serial port
CN2
RJ-45 ISDN connector
CN5
BNC connector
CN3

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
Factory configured - do not alter
RESET
N/A
»
Hub connection enabled
MDI/X
In

Single PC connection enabled
MDI/X
Out

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
ALRT
Orange
On
Error detected on network
ALRT
Orange
Blinking (slow)
Device is loading software during power up or new software is being downloaded
ALRT
Orange
Blinking (fast)
Self diagnostic test is being conducted during power up
ALRT
Orange
Off
Device has passed diagnostic tests and is working properly
PWR
Green
On
Power is on
PWR
Green
Blinking (slow)
New software is being downloaded
PWR
Green
Blinking (fast)
Self diagnostic test or software loading is being conducted during power up
PWR
Green
Off
Power is off
LINK
Orange
On
LAN connection established
LINK
Orange
Off
No LAN connection detected
ISDN
Green
On
Device is connected to a working ISDN line
ISDN
Green
Blinking
An error condition has been detected on the ISDN line
ISDN
Green
Off
ISDN condition not present
CH1
Yellow
On
ISDN call is in progress on channel 1
CH1
Yellow
Blinking
ISDN call is in dialing state on channel 1
CH1
Yellow
Off
ISDN call is not in progress on channel 1
CH2
Yellow
On
ISDN call is in progress on channel 2
CH2
Yellow
Blinking
ISDN call is in dialing state on channel 2
CH2
Yellow
Off
ISDN call is not in progress on channel 2
VOICE
Yellow
On
Voice call in progress
VOICE
Yellow
Blinking
Handset is off hook, dial tone present; call has been dialed and is ringing out, or an incoming call is being received
VOICE
Yellow
Off
Voice call not in progress
WAN
Yellow
On
WAN connection is valid and can pass data
WAN
Yellow
Blinking
Error detected on the WAN port
Note:
ISDN utilization LEDs provide an indication of ISDN utilization as a percentage of network loading. If ISDN utilization is consistently indicated at 100%, the device may be configured to filter some of the data, or an additional link may be required.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

OFFICECONNECT REMOTE 510/511 modem/telephone/ISDN Settings and Configuration

Search

My Books

Discover

Card Type	ISDN to Ethernet router
NIC Type	ISDN, Ethernet
Maximum Onboard Memory	Unidentified
I/O Options	RJ-45 (2), 9-pin serial port (RS-232), BNC connector, ISDN BRI interface
Network Transfer Rate	128Kbps
Topology	Star
Wiring Type	RJ-45 Unshielded twisted pair ISDN BRI RG58A/U 50ohm coaxial
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
DC power connector	CN1	RJ-45 UTP connector	CN4
9-pin serial port	CN2	RJ-45 ISDN connector	CN5
BNC connector	CN3

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	RESET	N/A
»	Hub connection enabled	MDI/X	In
	Single PC connection enabled	MDI/X	Out

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
ALRT	Orange	On	Error detected on network
ALRT	Orange	Blinking (slow)	Device is loading software during power up or new software is being downloaded
ALRT	Orange	Blinking (fast)	Self diagnostic test is being conducted during power up
ALRT	Orange	Off	Device has passed diagnostic tests and is working properly
PWR	Green	On	Power is on
PWR	Green	Blinking (slow)	New software is being downloaded
PWR	Green	Blinking (fast)	Self diagnostic test or software loading is being conducted during power up
PWR	Green	Off	Power is off
LINK	Orange	On	LAN connection established
LINK	Orange	Off	No LAN connection detected
ISDN	Green	On	Device is connected to a working ISDN line
ISDN	Green	Blinking	An error condition has been detected on the ISDN line
ISDN	Green	Off	ISDN condition not present
CH1	Yellow	On	ISDN call is in progress on channel 1
CH1	Yellow	Blinking	ISDN call is in dialing state on channel 1
CH1	Yellow	Off	ISDN call is not in progress on channel 1
CH2	Yellow	On	ISDN call is in progress on channel 2
CH2	Yellow	Blinking	ISDN call is in dialing state on channel 2
CH2	Yellow	Off	ISDN call is not in progress on channel 2
VOICE	Yellow	On	Voice call in progress
VOICE	Yellow	Blinking	Handset is off hook, dial tone present; call has been dialed and is ringing out, or an incoming call is being received
VOICE	Yellow	Off	Voice call not in progress
WAN	Yellow	On	WAN connection is valid and can pass data
WAN	Yellow	Blinking	Error detected on the WAN port
Note: ISDN utilization LEDs provide an indication of ISDN utilization as a percentage of network loading. If ISDN utilization is consistently indicated at 100%, the device may be configured to filter some of the data, or an additional link may be required.