KTC-1000E, KTC-4000E Memory card Settings and Configuration

Card Type	Memory card
Chip Set	Unidentified
Maximum Onboard Memory	4MB RAM (12MB with 2 expansion modules installed)
I/O Options	Memory expansion module, feature connector
Hard Drives supported	None
Floppy drives supported	None
Data Bus	32-bit VESA Local Bus
Card Size	Full-length

CONNECTIONS
Function	Label	Function	Label
Memory expansion module connector	CN1	Memory expansion module connector	CN4
Memory expansion module connector	CN2	Feature connector	CN5
Memory expansion module connector	CN3

MEMORY CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
1MB	(8) 256KB x 4	(8) 256KB x 4	(8) 256KB x 4	(8) 256KB x 4
4MB	(8) 1MB x 4	(8) 1MB x 4	(8) 1MB x 4	(8) 1MB x 4
Note: Each bank contains eight bits of memory and a parity bit

CONNECTIONS
Function	Label	Function	Label
Header connector to main board	CN5	Header connector to main board	CN6

MEMORY CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
1MB	(8) 256KB x 4	(8) 256KB x 4	(8) 256KB x 4	(8) 256KB x 4
4MB	(8) 1MB x 4	(8) 1MB x 4	(8) 1MB x 4	(8) 1MB x 4
Note: Each bank contains eight bits of memory and a parity bit

MISCELLANEOUS TECHNICAL NOTES

Expansion module available in 1MB and 4MB versions. Each main board supports up to two modules.