G-13 RAMPAGE PLUS 286 VER. II & III Memory card Settings and Configuration

Card Type	Memory Expansion
Chipset Controller	Unidentified
I/O Options	Feature Connector
Maximum Dram	8MB

CONNECTIONS
Purpose	Location
Feature Connector	CN1

DRAM CONFIGURATION
Size	Bank 0	Bank 1	Bank 2	Bank 3
1024KB	(2) 256K x 9	(2) 256K x 9	NONE	NONE
2048KB	(2) 256K x 9	(2) 256K x 9	(2) 256K x 9	(2) 256K x 9
4096KB	(2) 1M x 9	(2) 1M x 9	NONE	NONE
8192KB	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9	(2) 1M x 9

DEFAULT CONFIGURATION TOGGLE
Purpose	JP3
Configuration default toggle first position	Pins 2 & 3 closed
Configuration default toggle second position	Pins 1 & 2 closed
Note:This toggle functions as a clearing of the firmware on the board. If the jumper is first on Pins 2 & 3 then changing this jumper to Pins 1 & 2 will cause the firmware to be erased and default values to be loaded. This will then stay until the jumper is moved again.

ADDRESS SELECT
Address		JP2/A	JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	JP2/G
»	0218h	Open	Open	Open	Open	Open	Closed	Open
	0208h	Open	Open	Open	Open	Open	Open	Closed
	0258h	Open	Open	Open	Open	Closed	Open	Open
	0268h	Open	Open	Open	Closed	Open	Open	Open
	02A8h	Open	Open	Closed	Open	Open	Open	Open
	02B8h	Open	Closed	Open	Open	Open	Open	Open
	02E8h	Closed	Open	Open	Open	Open	Open	Open