SERIAL/PARALLEL INTERFACE CARD IO card Settings and Configuration

Card Type	Multi I/O card
Chipset/Controller	Unidentified
I/O Options	Parallel port, serial ports (2)
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Serial port 2	J1	Parallel port	J3
Serial port 1	J2

SERIAL PORT CONFIGURATION
Port 1 (J2)		SW1/1	SW1/3
»	COM1	On	Off
	COM2	Off	On
	Disabled	Off	Off

SERIAL PORT CONFIGURATION
Port 2 (J1)		SW1/1	SW1/3
»	COM1	On	Off
	COM2	Off	On
	Disabled	Off	Off

PARALLEL PORT CONFIGURATION
Port		LPT	SW1/2	JP2
»	Enabled	1	On	Pins 2 & 3 closed
	Disabled	2	Off	Pins 1 & 2 closed

COM PORT CHANGE CONFIGURATION
Port		JP1
»	Normal	Pins 1 & 2, 4 & 5 closed
	Change	Pins 2 & 3, 5 & 6 closed
Note: This jumper should be changed from the "Normal" setting if LPT is enabled. When JP1 is in "Change", COM1 and COM2 are reversed.

FACTORY CONFIGURED - DO NOT ALTER
Switch	Position
SW1/4	N/A