MT-201A IO card Settings and Configuration

Card Type	Multi I/O card
Chip Set	Goldstar
Maximum Onboard Memory	Unidentified
I/O Options	Parallel printer port, serial ports (2), game port, floppy drive interface
Floppy drives supported	Unidentified
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
Parallel port	CN1	Serial port 1	ASYN1
9 pin digital video port	CN2	Serial port 2	ASYN2
Floppy drive interface	CN3

USER CONFIGURABLE SETTINGS
Function	Label	Position
Game port enabled	JP5	Closed
Game port disabled	JP5	Open

PARALLEL PORT ADDRESS SELECTION
Setting	Label	Position
LPT1 (378h)	JP4	Pins 1 & 2, 3 & 4 closed
LPT2 (278h)	JP4	Pins 3 & 4, 7 & 8 closed

SERIAL PORT 1 ADDRESS SELECTION
Setting	Label	Position
COM1 (3F8h)	JP6	Pins 1 & 2, 13 & 14 closed
COM2 (3F8h)	JP6	Pins 5 & 6, 11 & 12 closed
COM3 (3F8h)	JP6	Pins 3 & 4, 13 & 14 closed
COM4 (3F8h)	JP6	Pins 7 & 8, 11 & 12 closed

MISCELLANEOUS TECHNICAL NOTES

Note: To enable port 2, IC’s 8250B, 75188, and 75189 must be installed. If JP6 is a 20-pin connector, then Pins 15 & 16, 19 & 20 closed activate COM2 and Pins 15 & 16, 17 & 19 closed activate COM4.