DS-100, DS-100S IO card Settings and Configuration

Card Type	Serial interface
Chipset Controller	Unidentified
I/O Options	Serial ports (2)
Maximum Dram	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Serial port 1	J1	Serial port 2	J2

SERIAL PORT CONFIGURATION
Port 1	Port 2	SW2/6	SW4/6
Enabled	Enabled	On	On
Enabled	Disabled	On	Off
Disabled	Enabled	Off	On
Disabled	Disabled	Off	Off

SERIAL INTERRUPT SHARING SELECTION
Port 1	Port 2	JP2
Non-sharable	Non-sharable	Pins 1 & 2, 4 & 5 closed
Non-sharable	Sharable	Pins 1 & 2, 5 & 6 closed
Sharable	Non-sharable	Pins 2 & 3, 4 & 5 closed
Sharable	Sharable	Pins 2 & 3, 5 & 6 closed

PORT 1 ADDRESS SELECT
Address	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6	SW1/7
0000h	On	On	On	On	On	On	On
0008h	On	On	On	On	On	On	On
0010h	On	On	On	On	On	On	On
0018h	On	On	On	On	On	On	On
02E8h (COM4:)	On	On	On	On	On	On	Off
02F8h (COM2:)	On	On	On	On	On	On	Off
03E8h (COM3:)	On	On	On	On	On	On	Off
03F8h (COM1:)	On	On	On	On	On	On	Off
FFE0h	Off	Off	Off	Off	Off	Off	Off
FFE8h	Off	Off	Off	Off	Off	Off	Off
FFF0h	Off	Off	Off	Off	Off	Off	Off
FFF8h	Off	Off	Off	Off	Off	Off	Off

PORT 1 ADDRESS SELECT (CON'T)
Address	SW1/8	SW2/1	SW2/2	SW2/3	SW2/4	SW2/5
0000h	On	On	On	On	On	On
0008h	On	On	On	On	On	Off
0010h	On	On	On	On	Off	On
0018h	On	On	On	On	Off	Off
02E8h (COM4:)	On	Off	Off	Off	On	Off
02F8h (COM2:)	On	Off	Off	Off	Off	Off
03E8h (COM3:)	Off	Off	Off	Off	On	Off
03F8h (COM1:)	Off	Off	Off	Off	Off	Off
FFE0h	Off	Off	Off	Off	On	On
FFE8h	Off	Off	Off	Off	On	Off
FFF0h	Off	Off	Off	Off	Off	On
FFF8h	Off	Off	Off	Off	Off	Off
Note: A total of 8191 memory base address settings are available. The switches are a binary representation of the decimal addresses. Switch 2/5 is the Least Significant Bit and switch 1/1 is the Most Significant Bit. The switches have the following decimal values: switch 2/5=1, 2/4=2, 2/3=4, 2/2=8, 2/1=16, 1/8=32, 1/7=64, 1/6=128, 1/5=256, 1/4=512, 1/3=1024, 1/2=2048, 1/1=4096. Turn off the switches and add the off switches to obtain the correct memory base address. (On=0, Off=1)

PORT 1 DTE/DCE SELECTION
JP5
DTE	DCE

PORT 2 ADDRESS SELECT
Address	SW3/1	SW3/2	SW3/3	SW3/4	SW3/5	SW3/6	SW3/7
0000h	On	On	On	On	On	On	On
0008h	On	On	On	On	On	On	On
0010h	On	On	On	On	On	On	On
0018h	On	On	On	On	On	On	On
02E8h (COM4:)	On	On	On	On	On	On	Off
02F8h (COM2:)	On	On	On	On	On	On	Off
03E8h (COM3:)	On	On	On	On	On	On	Off
03F8h (COM1:)	On	On	On	On	On	On	Off
FFE0h	Off	Off	Off	Off	Off	Off	Off
FFE8h	Off	Off	Off	Off	Off	Off	Off
FFF0h	Off	Off	Off	Off	Off	Off	Off
FFF8h	Off	Off	Off	Off	Off	Off	Off

PORT 2 ADDRESS SELECT (CON'T)
Address	SW3/8	SW4/1	SW4/2	SW4/3	SW4/4	SW4/5
0000h	On	On	On	On	On	On
0008h	On	On	On	On	On	Off
0010h	On	On	On	On	Off	On
0018h	On	On	On	On	Off	Off
02E8h (COM4:)	On	Off	Off	Off	On	Off
02F8h (COM2:)	On	Off	Off	Off	Off	Off
03E8h (COM3:)	Off	Off	Off	Off	On	Off
03F8h (COM1:)	Off	Off	Off	Off	Off	Off
FFE0h	Off	Off	Off	Off	On	On
FFE8h	Off	Off	Off	Off	On	Off
FFF0h	Off	Off	Off	Off	Off	On
FFF8h	Off	Off	Off	Off	Off	Off
Note: A total of 8191 memory base address settings are available. The switches are a binary representation of the decimal addresses. Switch 4/5 is the Least Significant Bit and switch 3/1 is the Most Significant Bit. The switches have the following decimal values: switch 4/5=1, 4/4=2, 4/3=4, 4/2=8, 4/1=16, 3/8=32, 3/7=64, 3/6=128, 3/5=256, 3/4=512, 3/3=1024, 3/2=2048, 3/1=4096. Turn off the switches and add the off switches to obtain the correct memory base address. (On=0, Off=1)

PORT 2 DTE/DCE SELECTION
JP6
DTE	DCE

PORT 1 INTERRUPT SELECTION
IRQ	JP5
2	Pins 1 & 2 closed
3	Pins 3 & 4 closed
4	Pins 5 & 6 closed
5	Pins 7 & 8 closed
6	Pins 9 & 10 closed
7	Pins 11 & 12 closed

PORT 2INTERRUPT SELECTION
IRQ	JP6
2	Pins 1 & 2 closed
3	Pins 3 & 4 closed
4	Pins 5 & 6 closed
5	Pins 7 & 8 closed
6	Pins 9 & 10 closed
7	Pins 11 & 12 closed

INPUT CLOCK DIVISOR SELECT
JP1
10 (Default)	5	2	1