2040MT-MC IO card Settings and Configuration

PATTON ELECTRONICS COMPANY

2040MT-MC

Card Type
V.35/RS-422 to HSSI Interface Converter
Chip Set
Unidentified
I/O Options
V.35/RS-422 DCE/DTE port, HSSI DCE/DTE port, power
Maximum Data Rate
10Mbps
Data Bus
External

CONNECTIONS
Function
Label
Function
Label
V.35/RS-422 DCE/DTE port
(34-pin male connector)
CN1
HSSI DCE/DTE port (50-pin connector)
CN2
Power
CN3

GAPPED CLOCK
Setting
SW1/1
SW1/2
»
HSSI gapped clock disabled
On
Off

HSSI gapped clock enabled. Data flow is interrupted by an idle clock signal
Off
On

SYNCHRONIZATION METHOD
Setting
SW1/3
SW1/4
»
Data skips sync circuit
Off
On

Data passes through sync circuit
On
Off

DIAGNOSTIC LED(S)
LED
Color
Status
Condition
STS
Green
On
Both DTR and DSR signals are active
STS
Green
Off
DTR and/or DSR signals are inactive
TST
Red
On
Device is conducting a loopback test
TST
Red
Off
Device is not conducting a loopback test

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

2040MT-MC IO card Settings and Configuration

Search

My Books

Discover

Card Type	V.35/RS-422 to HSSI Interface Converter
Chip Set	Unidentified
I/O Options	V.35/RS-422 DCE/DTE port, HSSI DCE/DTE port, power
Maximum Data Rate	10Mbps
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
V.35/RS-422 DCE/DTE port (34-pin male connector)	CN1	HSSI DCE/DTE port (50-pin connector)	CN2
Power	CN3

GAPPED CLOCK
Setting		SW1/1	SW1/2
»	HSSI gapped clock disabled	On	Off
	HSSI gapped clock enabled. Data flow is interrupted by an idle clock signal	Off	On

SYNCHRONIZATION METHOD
Setting		SW1/3	SW1/4
»	Data skips sync circuit	Off	On
	Data passes through sync circuit	On	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
STS	Green	On	Both DTR and DSR signals are active
STS	Green	Off	DTR and/or DSR signals are inactive
TST	Red	On	Device is conducting a loopback test
TST	Red	Off	Device is not conducting a loopback test