HIGH SPEED SSA DATA PUMP IO card Settings and Configuration

Card Type	Data Pump
Chip Set	Intel
Maximum Onboard Memory	512KB EPROM, 256KB SRAM
I/O Options	SSA interface via 9 pin serial ports (2 RS-232), Host-Side PCI bus, Top edge test card connector
Data Bus	32-bit PCI
Card Size	Half-length

CONNECTIONS
Function	Label	Function	Label
Host-side PCI bus	CN3	9-pin serial port 1	J1
Top edge test card connector	CN4	9-pin serial port 2	J3

USER CONFIGURABLE SETTINGS
Function	Label	Position
Port 1 external SSA connector enabled	J2	Pins 3 & 4, 5 & 6, 11 & 12, 13 & 14 closed
Port 1 external SSA connector disabled	J2	Open
Port 2 external SSA connector enabled	J3	Pins 3 & 4, 5 & 6, 11 & 12, 13 & 14 closed
Port 2 external SSA connector disabled	J3	Open
Note: If an SSA application does not require the use of external serial ports, a custom cable may be used to connect the odd number pins of J2 and/or J4 to an internal device loop.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED 1	Green	On	Firmware loaded and executed
LED 1	Green	Off	Firmware not loaded and executing or a serious error condition exists
LED 2	Red	On	One or more SSA ports are active
LED 2	Red	Off	No ports are active