ORBIT XT I/O-PERFECT IO card Settings and Configuration

Card Type	Multi-I/O card
Chip Set	ASIC
I/O Options	Floppy drive interface, game port, parallel port, serial ports (2)
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	8-bit ISA
Card Size	Half-length, full-height

CONNECTIONS
Function	Label	Function	Label
Serial port 1	CN1	Parallel port	CN4
Serial port 2	CN2	34-pin cable connector - floppy drive	CN5
Game port	CN3

USER CONFIGURABLE SETTINGS
Function	Label	Position
Enable serial port 2	JP6	Open
Disable serial port 2	JP6	Closed
Enable serial port 1	JP7	Open
Disable serial port 1	JP7	Closed

PARALLEL PORT ADDRESS SELECTION
Setting	JP1	JP2
LPT1 (378h)	Pins 1 & 2 closed	Pins 2 & 3 closed
LPT2 (278h)	Pins 2 & 3 closed	Pins 2 & 3 closed
Disabled	-	Pins 1 & 2 closed

SERIAL PORT 1 ADDRESS SELECTION
Setting	JP3	JP4
COM1 (3F8h)	Pins 1 & 2 closed	Pins 1 & 2 closed
COM2 (2F8h)	Pins 2 & 3 closed	Pins 2 & 3 closed

BIOS ADDRESS SELECTION
Address	JP10
CA00h	Pins 1 & 2 closed, pins 3 & 4 closed
CC00h	Pins 2 & 4 closed, pins 1 & 3 closed
CE00h	Pins 1 & 2 closed, pins 5 & 6 closed

FLOPPY DISK CONTROLLER SELECTION
Setting	JP5	JP8	JP9
Enable	Closed	Open	Closed
Disable	Open	Closed	Open