PERSONAL488/MM IO card Settings and Configuration

Card Type	IEEE 488 interface
Chipset	NEC PD7210/IOTech IOT7210
I/O Options	IEEE 488 bus
Data Bus	8-bit PC/104

CONNECTIONS
Function	Label
IEEE 488 bus interface	CN1
Note:A standard IEEE 488 bus connector is provided on an included adapter cable.

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Card generates clock source	JP1	Pins 1 & 2 closed
	PC/104 bus generates clock source	JP1	Pins 2 & 3 closed
»	Factory configured - do not alter	SW1/6	Unidentified
»	Factory configured - do not alter	SW1/7	Unidentified
»	Factory configured - do not alter	SW1/8	Unidentified

INTERRUPT SELECTION
Setting		JP2/A	JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	SW1/1	SW1/2	SW1/3
	2	Closed	Open	Open	Open	Open	Open	On	Off	On
	3	Open	Closed	Open	Open	Open	Open	Off	Off	On
	4	Open	Open	Closed	Open	Open	Open	On	On	Off
	5	Open	Open	Open	Closed	Open	Open	Off	On	Off
	6	Open	Open	Open	Open	Closed	Open	On	Off	Off
»	7	Open	Open	Open	Open	Open	Closed	Off	Off	Off
	Disabled	Open	Open	Open	Open	Open	Open	N/A	N/A	N/A

BASE I/O ADDRESS SELECTION
Setting		SW1/4	SW1/5
»	02E1h	On	On
	22E1h	Off	On
	42E1h	On	Off
	62E1h	Off	Off

DMA SELECTION
Setting		J3/A	J3/B	J3/C	J3/D	J3/E	J3/F
»	1	Closed	Closed	Open	Open	Open	Open
	2	Open	Open	Closed	Closed	Open	Open
	3	Open	Open	Open	Open	Closed	Closed
	Disabled	Open	Open	Open	Open	Open	Open